<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TMichaels:
Jakob,
we will not touch your Primary Master Switch after a successful finish of the Endurance.
The "End of Endurance"-Marshals who accompany your car to refueling will just signalise your driver to stop the engine, but you will have to switch off the Primary Master Switch at least when approaching the fuel station.
Therefore you should find a way to quickly save your logging data after the CMMS has been used.
Why don't you just write your data periodic e.g. every ten seconds or every minute for example? That would solve the problem, especially if something unforeseen happens during testing and you have to shut down the car by the Master Switch. You would loose all your data in that case.
</div></BLOCKQUOTE>
Ok, thanks for the information.
The data will be saved when using the CMMS, so no problem.
Periodic saving of the data is a good idea, but this will result every time in a "new season" in our (bought) analyse-software. I think that's is not so ideal for the analysis of the data, but better than loosing all our data when using the Primary Master Switch. I'll think about it.
Jakob