+ Reply to Thread
Results 1 to 4 of 4

Thread: Tires, Wheels, Brake Pads, Radiator & Push-Pull Cables

  1. #1
    Trying to clean out our basement after competition:

    1 Set - Hoosier 18.0x6.0-10 R25B

    Ran during 2013 spring testing. $250 OBO + Shipping.

    Picture
    Picture

    1 Set - Hoosier 18.0x6.0-10 LC3

    Purchased 2011. Scrubbed, minimal wear. $200 OBO + Shipping.

    Picture

    1 Set - Hoosier 19.5x6.5-10 WET

    Purchased 2011. Mounted once, never ran. $400 OBO + Shipping.

    Picture
    Picture

    1 Set - 3 piece, 13" aluminum wheels - 6 inch wide, 25mm positive offset. 4 X 0.500" studs on 3.75" bolt circle diameter.

    I think they're from 2008. Goodyear D2696 tires are mounted, but sidewalls are cracked and they're not any good. Can demount tires if you don't want them. One wheel has damage from tire mounting, still holds pressure.

    Picture

    $500 OBO + Shipping.

    2x - Push-pull cables

    Unknown manufacturer. Have some part numbers and I can get some measurements if you're interested.

    $10/each + Shipping.

    Picture
    Picture
    Picture

    1x - Radiator with carbon fiber duct

    Again, not sure about the manufacturer. Ran on the 2009 car I think. Can get more info and measurements if you're interested.

    Picture

    $100 OBO + Shipping.

    14x - Performance Friction 7520.01.09.92 Disc Brake Pads

    Part number search says they're for Brembo 4-Piston wide band single pin, Yamaha monobloc 4-piston calipers. We have 14 packs and are willing to split up the lot. All are unopened.

    $25/pack + Shipping.

    Picture
    Picture

    All tires were stored in dry, cool basement in black plastic bags. Shipping would be USPS or pickup if you're nearby. Email hutch (at) uwracing.com if you're interested or want additional info.
    Eric Hutchinson

  2. #2
    How long is the longer cable. Thanks. Chad

  3. #3

  4. #4
    I tried sending you a PM about the dry tires. Did you receive it?
    UCONN FSAE: Old Guy #2
    www.facebook.com/uconnfsae

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts