Hello, Our team was going to design the impact attenuator initially, Our chassis is almost ready to be welded and the bulkhead size is 300mm x 300mm. We then decided that the standard impact...
 |
|
|
|
|
|
|
|
Type: Posts; User: moo moo racing
Hello, Our team was going to design the impact attenuator initially, Our chassis is almost ready to be welded and the bulkhead size is 300mm x 300mm. We then decided that the standard impact...
My front bulkhead is designed with the minimum size of 300mm by 300 mm area regarding frame rules.The standard impact attenuator type 12 is 14 inches X 12 inches, which means that the impact...
The post i was referring to was 'Henrique's' with the picture with caption 'main roll hoop brace bar support options'
Guys, i have searched the forums for a definite answer regarding pipe thicknesses for the figure 5 shown above..It is a structure that is properly triangulated from bracing to main hoop, but there is...
@canuck:i am notching it, i have some other ideas in mind now.
@kevin hayward : I believe i will buy some cheap MS pipes of small OD and use spot welds.I think that should do the job.
Thanks
Hi guys,
I was working with PVC pipes for making a mock chassis recently, and i wanted to make it pretty close to the actual cad model. I tried a few things to attach the pipes rigidly to each other...