footage from Baltic Open 2011
http://www.youtube.com/watch?v=8GTrBQIfgLQ&NR=1
 |
|
|
|
|
|
|
|
Type: Posts; User: Horace
footage from Baltic Open 2011
http://www.youtube.com/watch?v=8GTrBQIfgLQ&NR=1
I hope this is not going off topic. But after reading this thread and the one about 10"/13" wheels I was wondering how certain track/wheelbase would be more suitable for certain cornering...
Save it as a sat file
Has anyone had any experience with drawing spaceframes or any sort of structures with CATIA?
We're having trouble with assigning custom section profiles to the lines drawn. We did the whole line...
Has anyone had any experience with drawing spaceframes or any sort of structures with CATIA?
We're having trouble with assigning custom section profiles to the lines drawn. We did the whole line...
no
The other thread is here:
http://fsae.com/eve/forums/a/tpc/f/648600998/m/96310417541
Does anyone have any more suggestions for schools? I'm planning on doing a MS on Automotive Engineering also...
We're having some trouble after our first year in getting the ME department at our school to endorse the project. I was wondering what are some points that you guys use when you have to tell the...
we are building the first team in HK
are you from HK? </div></BLOCKQUOTE>
Yeah, check ur message inbox
Scania,
Are there any FSAE teams in Hong Kong? Just wondering...
Jan,
That's a really nice looking body!!
Can I ask what's the wheelbase?
Hi Ian,
We're using the 600RR for our engine also and have this same problem of putting the engine in the air. We did this for our first year car and if you look at the threads for the photos...
I don't know about the anti theft bypass and the other ones you said, but try running it after you bypass the BAS, because I think we only bypassed the BAS, clutch and side stand.
For the BAS, you...
http://www.instron.us/wa/products/images/3360_enlarge.jpg
Has anybody ever used a materials testing machine to dyno a shock?
The reason I ask this is because I have access to these machines...
http://www.instron.us/wa/products/images/3360_enlarge.jpg
Has anybody ever used a materials testing machine to dyno a shock?
The reason I ask this is because I have access to these machines...
Here's a shot that another team took, which I thought was pretty good. We didn't have a dedicated photographer because we're a small team.
http://www.mkosonen.com/fsaeday3/images/IMG_7882.jpg ...
You want it because it isn't more than what is strictly necessary, like what you said before.
And read Pat's article
After reaidng the rules one more time, we found out that there is a 1" O.d. x .065" wall requirement for the driver's restraint harness attachment except for the shoulder, which is even beefier.
...
After reaidng the rules one more time, we found out that there is a 1" O.d. x .065" wall requirement for the driver's restraint harness attachment except for the shoulder, which is even beefier.
...
Are the exact drawings in the 2008 rules going to be official? Did they say anything about it in VIR that they will be sticking to those templates are will they be making it smaller?
With absoltely no experience in mufflers and db levels I'd say buy a new db meter if you think that's the problem. From what you're saying $50 can save you a lot of time.
Hi,
For those of you who construct your uprights by welding sheet metal or tubes, how do you FEA your uprights?