Sir,
1. We had an air leak problem which we corrected. when we had the problem the engine would start, sore to a high rpm then fizzle out and stop within 2 to 3 sec
2. We are using a taper bore...
![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Type: Posts; User: raptor93
Sir,
1. We had an air leak problem which we corrected. when we had the problem the engine would start, sore to a high rpm then fizzle out and stop within 2 to 3 sec
2. We are using a taper bore...
Yes we do have an O2 sensor and we tried tuning the engine using it.The values of the sensor varied between 1.09 at the beginning to about 0.78 at the point where the exhaust becomes red hot.The...
These were the settings PE sent to us first with which the engine worked fine.However it did not go beyond3000 rpm and at 40 percent tps value and 3000 rpm exhaust became red hot.After this we asked...
It stalls at around 1500 to 2000 rpm
when we start the engine it runs for 2 secs and then shuts down.This has happened recently and we have tried about everything but are not able to start it.we changed the plugs,we checked the fuel...
Hello,
We are a fsae team from dubai.we are running a honda CBR 600rr 2006 engine on the car with a pe3 ecu.we were able to idle the engine at 1200 rpm at first and take the car to 30 km/hr...