Hi Dunk.
Actually there are no specific rules for body thickness.
I've worked months on modeling this body. I certainly understand some of ways to make the body and mold. my problem is that i...
![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Type: Posts; User: Farzaneh
Hi Dunk.
Actually there are no specific rules for body thickness.
I've worked months on modeling this body. I certainly understand some of ways to make the body and mold. my problem is that i...
Hi everyone.
I have searched and couldn't find the answer to these questions. I'd appreciate it if you would help me.
What is the proper thickness for fiberglass bodywork and undertray?
How...
Michael ,you mean for example if I fix the fuel tank on the floor pan ,extended before seat and firewall ,I should make hole in the floor pan under the fuel tank,to avoid fuel leakage to other zones...
you answer has opposite meanings look at this :
"
The fuel level line is only there to designate the maximum level of fuel. It is not for the team to see how much fuel is in the tank. It is...
Michael ,you mean for example if I fix the fuel tank on the floor pan ,extended before seat and firewall ,I should make hole in the floor pan under the fuel tank,to avoid fuel leakage to other zones...
Hi every body
I want to know where can I make hole to respect this law:
"IC2.7.3 Belly pans must be vented to prevent accumulation of fuel. At least 2 holes, each of a minimum
diameter of 25...
Hi every body ,we are first year team and we want to take part in Japan Formula SAE ,We have some problem in ses filling,some of things are mule:
we have to fix our anti intrusion plate to front...
Hi every body ,we are first year student and we want to take apart in Japan Formula SAE ,We have some problem in ses filling,some of things are mule:
we have to fix our anti intrusion plate to front...
Do any body know that what is the meaning of "Number of tubes" in SES From?
Here is the picture:
267
Hi
according to the T.3.22.1 rule we can use Quasi-static test for impact attenuator. Is that true ?
If it's true, what is the parameter for test ?
How we must do the test?
thanks
I have question about filling SES :
If we use baseline material should we fill "Your Tube" the OD & wall thickness which was determined in rules and if we use tube which has more OD & thickness it's...
Daniel
I designed my Space frame chassis with baseline material and wall thickness and OD,I wanted to check it with AF conditions and forces.
I simulate it and it failed the problem is by my design...
Hi Every Body
I found answer in SolidWorks.com/Forums .Any body want to simulate this boundary condition use "Use Reference Geometry" and add to Transition Tab x=y=z=0 and apply the load .
But...
thanks Jay
but I saw all of solidworks simulation on youtube and they don't talk about it directly,I post this problem on solidworks.com/forums it has after 1 day 54 visits but no reply!!Do you know...
Doesn't any body know it?
Thanks Daniel
Does this product explain about the analysis should be present for Alternative Frame Rules (SCRF)?
Hi Every Body
we are new team and want to fill SES:
Would any body give me filled Structural Equivalency Spreadsheet sample which used Steel spaceframe?
I want to fill mine but have doubt in...
ya, I have doubt about the options which COSMOS Works has.It has only "Fixed Displacement" , the software did not specified the detail of these conditions (may I don't have clue!) 235
Sorry Claude!
I Updated My profile today.
thanks for your remind
Hi Every Body
We are first time participate in fsae competitions and have problem in chassis analysis:
First for ease of design we decided to build chassis by baseline materials so as the rules say...
thank you all.
I'm from Iran , Ferdowsi university of Mashhad.
Hi.
we are first year team. we want to know what materials can be used for body.
we now decide to use fiberglass or maybe composite.
what do you suggest?
mr. Amin Farzaneh