Position: Embedded Firmware/Software Engineer (Cincinnati, OH)
Company Description: Performance Electronics, Ltd (PE) is an engineering company
specializing in the design and manufacture of...
![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Type: Posts; User: B Lewis @ PE Engine Management
Position: Embedded Firmware/Software Engineer (Cincinnati, OH)
Company Description: Performance Electronics, Ltd (PE) is an engineering company
specializing in the design and manufacture of...
FSAE Teams,
Performance Electronics offers a collegiate program discount that is equal to about 30% off retail on ECUs and harnesses. You must order directly through Performance Electronics to get...
FSAE Teams,
Performance Electronics offers a collegiate program discount that is equal to about 30% off retail on ECUs and harnesses. You must order directly through Performance Electronics to get...
Company Description: Performance Electronics, Ltd (PE) is an engineering company, based in Cincinnati, Ohio, specializing in the design and manufacture of embedded electronic control systems
for...
Performance Electronics, Ltd (PE-Ltd) is an engineering company specializing in the design and manufacture of embedded electronic control systems for various industries. PE has extensive experience...
Hi Guys,
I just wanted to offer help for any FSAE teams needing assistance with tuning. I've skimmed through some of these recent posts and thought that I would address a couple of items.
Our...
Hi Mike,
Although I do not have any personal experience with the Mac and our software, I do know that we have had many customers over the years run it successfully. Generally if you are running...
We have had good luck using this technique in multi-cylinder engines by putting a secondary MAP sensor in an individual runner.
Yes and no.
The 'pulse to sync' feature uses the MAP signal as an indication of what cycle the engine is on when it starts. This lets you run in sequential injection/ignition mode without a cam...
Take a look at Performance Electronics
Good luck.
One more thought..... Even with production vehicle sensors, a very high level or accuracy is attainable if you calibrate the sensor yourself using known inputs.
For 'inexpensive' sensors we always first try to find an example of a sensor used on a production vehicle. Good examples are TPS sensors to measure suspension travel and GM oil pressure sensors for...
Hello All,
Performance Electronics will be offering a Test and Tune day at our West Chester, Ohio facility on Sunday April 14. The test day will be open to any FSAE teams needing help configuring...
Chris and Bubba..... you guys should talk. It looks like you are both from the Mi Tech FSAE team http://fsae.com/groupee_common/emoticons/icon_smile.gif
Hi Guys,
It sounds like you both have crank errors (trigger or sync). Trigger and sync errors should both be '0' when you capture a trigger diagnostic file. The most common problem for the f4i...
Sorry. I don't have those.
What is the P/N of the injector? We may have flowed these for dead times in the past.
The stock 2007 R6 coils are inductive and should be able to be driven with an inductive igniter. We drive these all the time directly from our PE3 ECU which has 4 built in coil igniters.
The older...
Hi Ben,
I agree. Adding a cam sensor is no fun and sometimes just asking for problems in the long run.
Hello FSAE'rs,
We have been working on some interesting features for single cylinder engines and engines with low signal strength on the cam sensor when cranking. These features have not fully...
How about Cincinnati in December. We could offer up our shop as a potential location http://fsae.com/groupee_common/emoticons/icon_smile.gif
Re-flashing ECUs will generally cost you about $450 per re-flash unless you are planning to do it yourself. If you don't do it yourself, I am not sure how you would get a good tune for a restricted...
I just thought that I would add some things to the earlier comments based on our experience.....
Injector dead time is the same as battery compensation. The method mentioned above will work...
Hi John,
I second those. We will be displaying and attending many of those as well.
I would also add another the the list which caters to the motorcycle and Powersports industry. This is the...
Tilman,
Many timing lights will trigger from the low tension (drive signals) going to the coil. If that doesn't work there is a truly cheap and elegant solution. Keep the plug in the head, buy...