Printable View
Is there anyone that is willing to share the force vs. velocity graph, of the Vanilla RC dampers?
We'd like to use these dampers but we have no data to complete our design.
Daniele
Firenze Race Team V2
http://www.firenzerace.too.it
DUCATI POWER at the UniversitÃ* di Firenze
Is there anyone that is willing to share the force vs. velocity graph, of the Vanilla RC dampers?
We'd like to use these dampers but we have no data to complete our design.
Daniele
Firenze Race Team V2
http://www.firenzerace.too.it
DUCATI POWER at the UniversitÃ* di Firenze
We are about to try and dyno test an old fox vanilla rc shock, at the moment setting up the dyno is proving difficult but we should have some data in the next couple of weeks.
Rich
Cardiff Uni
FS Team Manager
We are also planning to use the RC's and would appreciate seeing some dyno data when you get it. Good luck with the tests
we have a graph of force vs velocity from our vanilla RC's with soft, intermediate and hard settings, can email it if you want.
jpham1@student.monash.edu.au
Jarod,
I would appreciate the data on the RC's
Thanks,
Joe Ojeda
jco18@csufresno.edu
Bulldog Racing
CSU, Fresno
www.csufresno.edu/IndTech/SAE
Jarrod,
I too would appreciate the data on the RC's if you're willing to help out a fellow Victorian http://fsae.com/groupee_common/emoticons/icon_wink.gif
harnden@deakin.edu.au
Aaron Harnden
Phantom Engineering
Chief Design Engineer 2004
I may not always be right, but i'm never wrong...