adams/car2005 fsae template

[peat_785]

I am not able to download the FSAE template for adams/car2005 .

Does anybody has this model and can give me a copy of it?

Thank you soo much

[peat_785]

http://fsae.com/groupee_common/emoticons/icon_confused.gif

[John_Burford]

http://forums.mscsoftware.com/...psed&sb=5&o=&fpart=1 (http://forums.mscsoftware.com/adams/showflat.php?Cat=&Board=university&Number=46138&page=0&view=collapsed&sb=5&o=&fpart=1)

[peat_785]

Originally posted by John_Burford:
http://forums.mscsoftware.com/...psed&sb=5&o=&fpart=1 (http://forums.mscsoftware.com/adams/showflat.php?Cat=&Board=university&Number=46138&page=0&view=collapsed&sb=5&o=&fpart=1)


Thank John_Burford, I know that they are there but I can´t acces to them, soo if anybody can give me a copy i will be very grateful.

[peat_785]

nothing? http://fsae.com/groupee_common/emoticons/icon_confused.gif

[peat_785]

anybody can help me?

[Simon Dingle]

Have you tried contacting the admin of that site?

Since the dimensinos are given in the rules, have you tried modelling the templates yourself?

[Bobby Doyle]

You need to change your access level to Academic User.

[John_Burford]

As mentioned in an early post I'm working on a set of templates that better matches the topology of a FSAE car and is easier for a novice to use. I am not finished. Current improvements include:

Chain drive powertrain
Friction and viscous Limited Slip Diff
Single mount rear brake acting thru the diff
T type swaybar
Diff supported by bearing carriers and links (brake mounted to right side bearing carrier)
Several usability improves (like spring perch offset that was only accessible in template builder)

For those that are interested in Multi-body simulation, please contact me about features you are interested in studying with the model.

John Burford

http://www.burford-eng.com/98_acar.jpg

[keci]

i am a new user of adams car.i want to get fsae template for suspension.can i get it from you ?

[tou]

i also want this template