Vanny
02-05-2008, 06:25 AM
Some of you will be aware of my involvement with the UoL FS team and that we are using the Aprilia RXV550 engine. Well after the terrible events of last year (note to self, don't outsource the engine wiring) we're getting somewhere.
THE biggest problem we've had with the engine thus far has actually been designing it in without a good CAD model, a few days , many headaches and number of trips to the pub later and we are getting some where!
http://photos-d.ak.facebook.com/photos-ak-sf2p/v196/202/24/284104586/n284104586_2452115_4869.jpg
To those who are in need of a CAD model, it is unlikely that this will be made available anytime soon so please don't ask (it's being continually updated and changed), what i can tell you though is that it is possible to generate a CAD file with little more than inginuity and lots of rules!
Lets hope this year is a little better for us!
THE biggest problem we've had with the engine thus far has actually been designing it in without a good CAD model, a few days , many headaches and number of trips to the pub later and we are getting some where!
http://photos-d.ak.facebook.com/photos-ak-sf2p/v196/202/24/284104586/n284104586_2452115_4869.jpg
To those who are in need of a CAD model, it is unlikely that this will be made available anytime soon so please don't ask (it's being continually updated and changed), what i can tell you though is that it is possible to generate a CAD file with little more than inginuity and lots of rules!
Lets hope this year is a little better for us!