ProE assembly question

[Adam Andriano]

When creating an assembly in ProE each part/subassembly may or may not have a small box, or variation of a box, right before the part/subassembly name. Does anyone know what these mean or what they are called? I just spent 2 hours looking this up online and in ProE's help file and found nothing. Thanks.

[Adam Andriano]

When creating an assembly in ProE each part/subassembly may or may not have a small box, or variation of a box, right before the part/subassembly name. Does anyone know what these mean or what they are called? I just spent 2 hours looking this up online and in ProE's help file and found nothing. Thanks.

[VU_Thornw]

Generally, the box means that the part is has some kinematic association. Either it is referenced to a part that has been defined with a kinematic constraint or it may be underconstrained.

[Coombesy]

Check the first item on the feature tree with that box next to it, if it isn't fully constrained every child of it will also be incompletely constrained.