PDA

View Full Version : Nose Cone Testing



chavez
01-16-2006, 08:08 AM
We got our testing underway this weekend with a trial run of an old printer to do the initial testing. We have a couple different nose cone designs to test. Our sled has a high-g accelerometer measuring rate of deceleration that we are monitoring with our data acquisition system. The whole set-up isn't quite university approved, but enjoy.

http://www4.ncsu.edu/~sdchavka/setup.JPG

http://www4.ncsu.edu/~sdchavka/crush.avi

-Chavez

chavez
01-16-2006, 08:08 AM
We got our testing underway this weekend with a trial run of an old printer to do the initial testing. We have a couple different nose cone designs to test. Our sled has a high-g accelerometer measuring rate of deceleration that we are monitoring with our data acquisition system. The whole set-up isn't quite university approved, but enjoy.

http://www4.ncsu.edu/~sdchavka/setup.JPG

http://www4.ncsu.edu/~sdchavka/crush.avi

-Chavez

Korey Morris
01-16-2006, 02:46 PM
broken links...

kwancho
01-16-2006, 04:03 PM
Worked for me. That was good for a laugh. http://fsae.com/groupee_common/emoticons/icon_wink.gif

Korey Morris
01-16-2006, 07:53 PM
http://fsae.com/groupee_common/emoticons/icon_frown.gif still not working here. I'm interested...