View Full Version : Aisin superchargers
Frank
02-10-2008, 05:21 AM
Has anyone used an Aisin AMR300 or AMR500 supercharger in FSAE?
Any advice would be grand...
Oh, and I'm considering it's use for an "ex FSAE car", not a current one, so the restrictor will be removed.
Frank
02-10-2008, 11:55 PM
bump.
anyone?
Kirk Feldkamp
02-11-2008, 11:22 AM
I've never seen or heard of one of those used in FSAE. If I wanted a *supercharger* on an ex-FSAE car, personally I'd go with a Rotrex. They've got a small one that would work well on an unrestricted 600. There's also a few small turbos that would make some killer power too. What is the car getting used for?
-Kirk
Kirby
02-11-2008, 01:01 PM
Finally got all the parts together Frank?
What side of the engine are you planning to take your belt drive off?
If you could be swayed to a turbo, I'd track down one of these:
http://img517.imageshack.us/img517/251/turbouu6.jpg
The AFX Master
02-11-2008, 05:01 PM
I like your "Heineken Plenum".. i think it could pass tech if the drink nozzle is at 20mm. And off course, free of the "yellow turbo lube"
Powered by vBulletin® Version 4.1.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.