Mustang front spindle dimensions for wilwood kit

[Jeniffer]

Hi all
Our team has purchase the wilwood complete brake kit,which is intended for 1970-1980 mustangs
I need to manufacture the spindle
Can anyone help with a drawing or dimensions of the original mustang spindle?
Thanks

[Jeniffer]

Hi all
Our team has purchase the wilwood complete brake kit,which is intended for 1970-1980 mustangs
I need to manufacture the spindle
Can anyone help with a drawing or dimensions of the original mustang spindle?
Thanks

[Cement Legs]

Sorry i dont have the dimensions you are looking for but I am curious how you decided to buy that kit. It just seems that a brake set for a 3000 lb car is a little excessive?

You may be able to get a spindle real cheap from a wreck and take your measurements from that if nobody else has the info you are looking for.

[Jay Fleming]

Jeniffer, if you all decided you want a spindle to get the dimensions off of, let me know. We own a salvage yard here in Oklahoma and we have a complete front suspension sitting around.

[Skooter327]

If you happened to find a good auto parts store, they might have the spindle you seek on hand. A friendly counterperson might let you take the measurements you need right at the parts counter.

Of course, it wouldn't be very honest to by the spindle to measure it, then return the new, unused part...

[Jeniffer]

We wont be buying the spindle cos it wont fit our need as we need the back end of it a bit different
therefore we must machine a complete spindle by ourselves so I need the dimensions(mainly diameters ) of the front end.
Jay if you could help out I would be gratefull

[Jay Fleming]

Jeniffer, when I'm at work tomorrow I'll try to get the diameters of the spindle. If I have some time afterwards, I'll draw up a sketch showing the diameters and the taper fo the spindle, etc. Email me at dragracingz28@ou.edu so I can have your email address and I'll send the pic to you.

[Nihal]

go ask on www.corner-carvers.com (http://www.corner-carvers.com) they have alot of Mustang specific tech.