The first FSAE Demo car chassis in Hong Kong

[Scania]

because it is only a Demo, so the materiel is very casual, & the size a little bit big

[frenzy]

if one has the material laying around, i think it's a good idea to build a test chassis to check the proportions.

a thing i noticed is your main roll hoop - as far as i interpreted the rules, the "uncut section" has to extend all the way to the lower frame bars and not to the upper ones?

[Scania]

a thing i noticed is your main roll hoop - as far as i interpreted the rules, the "uncut section" has to extend all the way to the lower frame bars and not to the upper ones?

===============================================
because it still not finish

[Tilman]

The rear part of the frame will not be very stiff i guess ... its built out of rectangles, not triangles ...

[Scania]

we will make some triangles next Monday

[Diablo_niterider]

i think its a great start , we made our first one out of pvc pipes we get for real cheap .
crude but fast and effective , got the entire frame done in 2 hrs to get the idea of the real thing .

[Scania]

Originally posted by Diablo_niterider:
i think its a great start , we made our first one out of pvc pipes we get for real cheap .
crude but fast and effective , got the entire frame done in 2 hrs to get the idea of the real thing .

because it's not only a demo chassis, we will make a demo car with CB250 engine

[Diablo_niterider]

oh cool we did something similar to using a 150 cc engine , we made the car for the sole purpose of marketing and proving it to others who did not believe that we could do it , we built it with our own money , we spent just around $1600 for the entire thing of which a significant bit was for making it look good .
after 2and a half years it still is in running condition

best of luck to you guys ,

regards

[Scania]

Originally posted by Diablo_niterider:
oh cool we did something similar to using a 150 cc engine , we made the car for the sole purpose of marketing and proving it to others who did not believe that we could do it , we built it with our own money , we spent just around $1600 for the entire thing of which a significant bit was for making it look good .
after 2and a half years it still is in running condition

best of luck to you guys ,

regards

150cc? @.@
2T or 4T?
how fast is it?

we are worried about can cb250 move the car or not....

[Horace]

Scania,

Are there any FSAE teams in Hong Kong? Just wondering...