+ Reply to Thread
Results 1 to 9 of 9

Thread: 2005 ODU Dyno Video

  1. #1

  2. #2
    ha, sweet, some mean torque in that thing
    Mike Duwe
    UWP Alumni

    Former Drivetrain Leader and Team Captain

  3. #3
    The front of that thing was definitely NOT strapped down. Man that was hella sketchy!

  4. #4
    play it frame by frame after it comes down... you see the straps on the front...
    -----------------
    ODU Motorsports
    Engine Team 04-06

  5. #5
    not saying your dyno opperator is incompetant but I have heard of more than one dyno shop that put in the dyno before they hired someone that knew how to run one......
    Mike Duwe
    UWP Alumni

    Former Drivetrain Leader and Team Captain

  6. #6
    nah man... we just had it strapped a lil too high on the back end and too low on the front end... we had to move the straps up in the back because we kept getting wheel spin and we just didn't think to move up the front straps...
    Friends don't let friends drive ricers!

  7. #7
    I don't know why the front wheels go up
    if any one know please answer me
    nima_r@me.iut.ac.ir
    Nima Rasouli
    My Engine Journal
    IUT Racing Team
    Isfahan University of Technology

  8. #8
    Originally posted by Nima:
    I don't know why the front wheels go up
    if any one know please answer me
    nima_r@me.iut.ac.ir
    well, I'm the guy behind the camera in this video, so I know first hand...
    all afternoon we had either been spinning tires or the clutch would be slipping and we decided to try and help get the rear to hook up a bit more and raised the tie down on the chassis....the front was still strapped but at and anchor distance for a full length car...well with the new rear tie down point on the chassis we were still having issues hooking up at the rubber and with the clutch...until they both held...then you get the wheelie
    Micah McMahan
    Freelance Design Engingeer
    Former MSI Defense Solutions - Sr. Design Engineer/Project Manager
    Former Roush Yates Engines - Sr. Design & Analysis Engineer
    3MI Racing LLC Owner/Engineer
    ODU FSAE 04 member, 05 controls leader, 06 control/ergo/brakes leader, 07 brakes/MC22 turbo engine/Asst Team Leader

  9. #9
    dyno wheelies....sounds like a new event at competition
    Mike Duwe
    UWP Alumni

    Former Drivetrain Leader and Team Captain

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts