I always blanchard grind our rotors after CNC'ing the profile. Way better than any other method I have found.
We use nodular iron, from http://www.dura-bar.com/index.cfm.
 |
|
|
|
|
|
|
|
I always blanchard grind our rotors after CNC'ing the profile. Way better than any other method I have found.
We use nodular iron, from http://www.dura-bar.com/index.cfm.
----
Mike Cook
It's an engineering competition, not an over-engineering competition!
"Russian style": Is that the same way Sukhoi and MiG make their fighter jets?
Olly
Olly
Academy Racing 04-07, 09-11
UNSW@ADFA
Ever get your hands on any Russian rifles? Those look like they were engineered with a foot kick and a large hammer.
Dr. Adam Witthauer
Iowa State University 2002-2013 alum
Mad Scientist, Gonzo Racewerks Unincorporated, Intl.
I'm pretty sure any time I hammer furiously it's accompanied by me yelling "This is how we fix things on RUSSIAN SPACE STATION!"
Wesley
OU Sooner Racing Team Alum '09
connecting-rods.blogspot.com
In mother Russia, the hammer fixes you....
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Adambomb:
Ever get your hands on any Russian rifles? Those look like they were engineered with a foot kick and a large hammer. </div></BLOCKQUOTE>
And for some reason they still have a 1000m sight
Shaun Kapples
Mechanical Engineer
Alumni, FSAE at UCF
Posting Permissions
Reply With Quote
