+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 40 of 40

Thread: best engine

  1. #31
    Senior Member
    Join Date
    Jun 2003
    Location
    Melbourne Australia
    Posts
    762
    but i am confuse. cbr best engn. it most win. but most loser 2. many time last. so cbr worst engn 2. how 2decide? wot 2 make cbr win engine but not lose bit? show me. you should give quickly answer hurry must be now urgently rush. i want it.
    n best suspensn? wot is best chassis? plz give 2 us!!
    great confidence of win!
    Geoff Pearson

    RMIT FSAE 02-04
    Monash FSAE 05
    RMIT FSAE 06-07

    Design it. Build it. Break it.

  2. #32
    Since fuel economy is becoming more of a factor, I would suggest you move to a really small engine. I would say single cylinder since that is what everyone else is doing. I personally would recommend moving to a really fuel efficient engine such as-

    http://www.osengines.com/engines/osmg2051.html

  3. #33
    So they are only 3.5cc each....

    You could legally put around 171 of them in a car. I would probably go for a W42 configuration. With 2.56hp each that would give a 430Hp engine. Add a turbo and another turbo then a supercharger for good measure and your laughing (all the power!!!). Think of the acceleration times.

    I will actually give someone a full $10 000 000 (Zimbabwe dollars) if they actually do this

  4. #34
    It's a shame they are 2 stroke! At 3.5cc each you could run 174 of them for 445hp @ 34,000rpm (unrestricted). Then add six million turbos and some NAWZ and you'll be laughing!
    Curtin Motorsport Team 07-08
    http://motorsport.curtin.edu.au/

  5. #35
    Senior Member
    Join Date
    Oct 2008
    Location
    Raleigh, NC
    Posts
    232
    There already was a discussion of the merits of RC plane engines....

    http://fsae.com/eve/forums/a/t...20877151#67620877151

    Also this....

    http://www.troybuiltmodels.com/items/RCS400R.html

    -William

  6. #36
    C'mon guys, we all know that torque win races, and this has all the torque you'll ever need:



    Only 5.6 million lb-ft...

  7. #37
    And look at that turbo!

  8. #38

  9. #39
    Originally posted by AxelRipper:
    Hey Canadian guys: Any chance of getting a competition sponsored by Canadian Tire up der in da Great White North? Every team starts from scratch inside a Canadian Tire and has a weekend/week to design and build a racecar from parts in the store.
    As long as we allow teams to use ratchet straps as a harness I don't see why this couldn't result in SAE Supra East.

  10. #40
    What an amusing thread! LOL

    I still like how only one person asked 'define best'....being all serious
    Micah McMahan
    Red Bull Powertrains Performance Design Team Leader
    3MI Racing LLC Owner/Engineer
    Former MSI Defense Solutions - Sr. Design Engineer/Project Manager
    Former Roush Yates Engines - Sr. Design & Analysis Engineer
    ODU FSAE 04 member, 05 controls leader, 06 control/ergo/brakes leader, 07 brakes/MC22 turbo engine/Asst Team Leader

+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts