Parts Clearout - Hoosiers, Goodyears, CBR600s...

[Big Red]

We've had a fairly major workshop clearout and have some stuff to shift. Everything is located in Glasgow (UK) and we'll happily sort shipping at cost.

<STRIKE>8x Hoosier 20.5x7-13 R25B slicks, brand new with stickers [£550/set]</STRIKE>
<STRIKE>4x Hoosier 21.0x6.5-13 wet tyres, brand new with stickers [£550/set]</STRIKE>
8x Goodyear Eagle 20.0x7-13 D2692 slicks, part-worn [£200/set]
4x Goodyear Eagle 20.0x7-13 D2696 slicks, part-worn [£200/set]
4x Goodyear Eagle 20.0x7-13 D2697 slicks, part-worn [£200/set]
8x Goodyear Eagle 20.0x7-13 D2691 inters, part-worn [£200/set]
<STRIKE>1x 200mm cube of Plascore aluminium honeycomb PCGA-XR1-5.2-1/4-N-3003 [£30]</STRIKE>
<STRIKE>5x Taylor Race machined steel tripod housings, four with CV boot seal flanges, used [£200]</STRIKE>
<STRIKE>2x Sigma Performance CBR600RR slipper clutches, brand new in box [£350ea]</STRIKE>
2x Honda CBR600RR8 engines, knackered [£100ea]
<STRIKE>1x Honda CBR600RR8 engine, overheated at FSUK'12, stripped and rebuilt, no problems found, not run since [£500]</STRIKE>
4x white racing helmets, BS6658 Type A compliant, various ages/manufacturers [POA]
1x Peterson 400 series -10AN 60micron inline filter, brand new and sealed [£50]
1x Peterson Scavenge -10AN inline filter, new but unsealed [£30]
Heaps and heaps of CBR600F4i parts in good condition

PM if you spot something you may be interested in!

Cheers,
Roy

University of Strathclyde Motorsport

[Fantomas]

Telling from what you are selling, I guess you will change your concept to 10" / single cylinder?

Fantomas

[Dewi Griffiths]

I'm getting the same impression! Would be cool to see what you're coming up with

[Big Red]

More or less, yep! Keeping our OZ rims and race RR8 for now though.

Also, we don't have room for all this stuff in our wee cupboard!

[Big Red]

Taylor Race housings and one slipper clutch now sold - plenty bits left though!

[Kealan O Carroll]

Originally posted by Big Red:
Taylor Race housings and one slipper clutch now sold - plenty bits left though!

Have you another f4i clutch ?
Also, the big brass boltamajigger going through the oil - water exchanger into the block, cam pulse sensor, oil strainer / pickup, and the original harness ?

[Kealan O Carroll]

would be interested in the helmets too, pm me

[Big Red]

Kealan, will have a look for you. We definitely have a stock F4i clutch or two, need to check the rest. Cheers!

[Akshay TUW]

hello roy,
i am interested in tripod joints, in case you have any.

[Big Red]

Akshay, afraid we have no tripods for sale, and the housings are now sold.

Cheers for the interest!