About Aprilia SXV 550 Engine CAD files

[taebyoung]

Hello, I'm KAIST student,

We start to prepare FSAE competition

But We have a lot of problem

I think Engine CAD files is one of that problem.

I tried to look for engine CAD files, but

there is not Aprilia SXV 550 CAD files.

If you have a cad file of this engine,

would you send it to me??

I will do my best to help others, too

My e-mail address is taebyoung1@naver.com

Thanks for your reading

[taebyoung]

Hello, I'm KAIST student,

We start to prepare FSAE competition

But We have a lot of problem

I think Engine CAD files is one of that problem.

I tried to look for engine CAD files, but

there is not Aprilia SXV 550 CAD files.

If you have a cad file of this engine,

would you send it to me??

I will do my best to help others, too

My e-mail address is taebyoung1@naver.com

Thanks for your reading

[Davidimurray]

Hi

We had our engine scanned by a sponsor of ours a few months back and as a result we have an iges file of the point cloud of the whole engine and also a file containing accurate points for the engine mounts.

We are happy to share this with other teams however the only thing we ask is that in recognition of our sponsor that you agree to run a small Hexagon metrology sticker on your car (http://www.hexagonmetrology.net/)

To receive the files you will need to have an email account that can accept 20-30mb files.

Cheers

Dave Murray
Cardiff Racing
www.cardiffracing.com

[taebyoung]

Thanks for your kind replying.

If you send SXV 550 CAD files to me, I will happily attach that sticker to our race car.

I will not give it to others without permittance.

Please send that logo and files to taebyoung1@naver.com

[rjwoods77]

any chance at getting that engine on the fsae part file database with that sponsor logo as a usage requirement. I not intersted in the motor other than comparing it to size of what we use now.

[James Waltman]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rob Woods:
any chance at getting that engine on the fsae part file database with that sponsor logo as a usage requirement. </div></BLOCKQUOTE>

Dave, if you're willing, send me an email and we can sort it out.

[Davidimurray]

Hi

Give me a couple of days and I will get all the files uploaded to the database

Cheers

Dave

[Tim Gornik]

You mean an engine scan similar to this?

[taebyoung]

Hi

I can't find your files uploaded to the database

Where did you upload your files?

If you did not upload, please notice me

Thanks.

[EPMAl]

I am also trying to get our SXV scanned. What CAD program are you using to read it?