Well its 3 weeks till MIS, whose out driving?? Pictures?!?
Well its 3 weeks till MIS, whose out driving?? Pictures?!?
Tim Gornik
Jayhawk Motorsports
Well its 3 weeks till MIS, whose out driving?? Pictures?!?
Tim Gornik
Jayhawk Motorsports
Lets start with yours!
I'll post something after our unveiling... Which is tomorrow, driving this weekend.
Daniel Wageman
University of Washington FSAE
Team 19: Chassis/Data Acq
Team 20: Data Acq Lead
Team 21: Engine, Power Package
Team 22-24: Technical Director
Lol completed car, good one.
From our unveiling yesterday:
In running state and ready to drive
Daniel Wageman
University of Washington FSAE
Team 19: Chassis/Data Acq
Team 20: Data Acq Lead
Team 21: Engine, Power Package
Team 22-24: Technical Director
___________________________
Zips Racing 2009-2014
Jorts and Tank-top model 2013-2014
Nice car, Daniel. How are those wings attached and is there an undertray with diffusor?
Judging from this picture, it looks like the endplates extend to the floor or chassis, but this would lack lateral stiffness. The front wing could be attached below the front bulkhead. So I assume both wings are sprung.
Regards
Thomas
Thanks!
There is a full undertray and diffuser that the rear wing is mounted to. There are extra supports for lateral movement. Front wing mounts just to the sides of the bulkhead.
Its all sprung... For now...
PS, Our first drive today went great. Coming from the F4i, its hard to get used to how loud the singles are...
Daniel Wageman
University of Washington FSAE
Team 19: Chassis/Data Acq
Team 20: Data Acq Lead
Team 21: Engine, Power Package
Team 22-24: Technical Director
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by wagemd:
Lets start with yours!
I'll post something after our unveiling... Which is tomorrow, driving this weekend. </div></BLOCKQUOTE>
The Kansas car looks something like:
Some of this:
A tiny bit of this:
Some inspiration from this:
A decent helping of this:
And finally a bunch of this:
Add it all together and you get this
Jayhawk Motorsports - JMS12 Powertrain Alumni
Rock Chalk Jayhawk
I like how you censored out the car but you can still see it on the guy's camera