+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Assorted Hoosier tires and Keizer Wheels

  1. #1
    We have used 10 inch wheels the last couple of years and don't plan on going back to 13". Send me a PM with an offer on anything listed below. Shipping costs will be added on to your offer. All tires are older than the spring of 2010, wets have probably only ran once if ever. I will double check all measurements before I ship anything. Thanks for looking.

    ***SOLD***4 used Goodyear 20x7-13 D2692
    ***SOLD***4 Keizer Kosmos series 4 lug 13" wheels 6.25" wide. 4.25" backspacing 4 x 100 mm lug pattern.
    ***SOLD***4 used Hoosier 20.5x6.5-13 R25A
    ***SOLD***4 Hoosier 20.5x6.5-13 Wet (probably only ran once if ever we haven't driven in the rain outside of comp.)
    ***SOLD***4 Keizer Kosmos series 4 lug 13" wheels 6.25" wide 4.25" back spacing. 4 x 100 mm lug pattern.




    ***SOLD***2 13" wheels 6.5" wide 4.00" backspacing. Front is offset 2.25"
    2 13" wheels 8.25" wide 3.00" backspacing. Front is offset 5"
    All 4 x 100 mm lug pattern. I think these are Keizer wheels too but I'm not sure. The centers are definitely Keizer though. I will consider selling the centers separately as I realize these are odd sized wheels.

    ***SOLD***2 Hoosier 20x6.5-13 Wet
    2 Hoosier 20x7.5-13 Wet
    Used once if ever.




    ***SOLD***4 new Hoosier 20.5x6-13 R25A
    I'm not sure when these were bought.

  2. #2
    how about $25 each for the old/new slicks. thanks johniv

  3. #3
    Very interested in a set of 4 wheels.

    I need to know a couple of things though.
    Is there a way someone could email me these specs (SelekUmur AT.Gmail.DOT.com):

    1- Bolt pattern
    2- Specs from the PDF file on this link:
    http://www.keizerwheels.com/

    GO TO "DOWNLOADS"
    DOWNLOAD "Spec sheet 1 Kosmo Mag wheel"

    I'd like to know the following:

    A
    B
    C
    D
    E

    Thank You
    Umur Selek
    President, Project Manager, Marketing Leader, Pedals&Brakes
    Rutgers Formula SAE 2010-2012

  4. #4
    Originally posted by johniv:
    how about $25 each for the old/new slicks. thanks johniv
    Are you talking about the Hoosiers at the bottom of the post with the stickers on them?
    Iowa State University
    Cyclone Racing

    Alumni '15-∞
    Senior Advisor '15
    Technical Director '13, '14
    Chassis Team Leader '12, '13
    Member '11

  5. #5
    We're interested in the set of 4 hoosier slicks with the stickers on it (20.5x6-13 's) if you've still got them.
    South Dakota State University Alum
    Electrical/Daq/Engine/Drivetrain/Tire guy '09-'14

    Go big, Go blue, Go JACKS!

  6. #6
    Originally posted by jlangholzj:
    We're interested in the set of 4 hoosier slicks with the stickers on it (20.5x6-13 's) if you've still got them.
    We still have them shoot me a pm with an offer.
    Iowa State University
    Cyclone Racing

    Alumni '15-∞
    Senior Advisor '15
    Technical Director '13, '14
    Chassis Team Leader '12, '13
    Member '11

  7. #7
    Junior Member
    Join Date
    Jun 2006
    Location
    Rapid City, SD
    Posts
    13
    I have a pm request with you for a couple sets of tires and also a set of rims - I hope they are still available. I hope to hear from you, Thanks.

  8. #8
    I will consider selling the centers from the last set of wheels by themselves. I realize these are odd sized rims and it's unlikely someone can use them. Thanks for all the interest in our stuff.
    Iowa State University
    Cyclone Racing

    Alumni '15-∞
    Senior Advisor '15
    Technical Director '13, '14
    Chassis Team Leader '12, '13
    Member '11

  9. #9
    We still have all the items pictured. Send me an offer.
    Iowa State University
    Cyclone Racing

    Alumni '15-∞
    Senior Advisor '15
    Technical Director '13, '14
    Chassis Team Leader '12, '13
    Member '11

  10. #10
    All offers will be considered.
    Iowa State University
    Cyclone Racing

    Alumni '15-∞
    Senior Advisor '15
    Technical Director '13, '14
    Chassis Team Leader '12, '13
    Member '11

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts