+ Reply to Thread
Page 2 of 14 FirstFirst 1 2 3 4 12 ... LastLast
Results 11 to 20 of 140

Thread: Formula SAE Australasia 2011 Competition: - Updates, Pictures, Stories, and More

  1. #11
    What happened to UWAM's exhausts?! I noticed some new ones (EDIT: "We ran into serious problems with the carbon-fibre mufflers, with one half of the muffler splitting open on the left side. A quick change to the dyno mufflers allowed us to get back on track. The remainder of the day was spent giving some seat time to the drivers at comp." via UWAM website) Were those front wind deflectors allowed through tech? (EDIT No2.:As I understood from various sources, at first they were allowed, then asked to trim them and at the very end banned? Anyone confirm?)I noticed that RMIT also runs similar philosophy sidepod mounted rear wheel "covers". Also, do you have any weights? And more pics of the Auckland car please...

  2. #12
    Senior Member
    Join Date
    Dec 2009
    Location
    PERTH, Western Australia
    Posts
    208
    one of the carbon mufflers had de laminated due to a poor layup (new team, mistakes happen)
    we wont be running the FADS. UWAM is a little heavy at the moment...
    ex-UWA Motorsport

    General team member 2013-15, Vehicle Dynamics Team Lead 2012
    Project Manager 2011, Powertrain minion 2009/10

  3. #13
    ---------------------------
    2006 QUT Motorsport - Manufacturing Manager
    2007 QUT Motorsport - Controversy Raiser
    2008 University of Waterloo Formula Motorsports - Exchange Student / Electrical Team Manager
    2009 The University of Adelaide Motorspo

  4. #14
    University of Auckland, NZ

  5. #15
    Design finals:
    Auckland
    Monash
    RMIT
    Edith Cowan
    Malcolm Graham
    University of Auckland '06-'09
    www.fsae.co.nz

  6. #16
    Senior Member
    Join Date
    Oct 2002
    Location
    Melbourne, Australia
    Posts
    372
    Hi everyone,

    I have just set up a live stream of the Autocross from the top of the hill.

    The link is:

    http://www.ustream.tv/channel/fsae-a

    This is my first time doing this so please excuse any glitches.

    I think they will be starting in a couple of minutes so tune in, now

    There is a little rain on the radar so should be interesting. We also have about 20 teams currently in line and ready to run so should be a very entertaining afternoon.

    IF this stream goes well we will try and broadcast both heats of Enduro tomorrow as well.

    Enjoy!

    Scott

    PS: If the stream is working can you please repost the link to fstotal, facebook etc and get the word out.

    Cars starting up now!
    Regards,

    Scott Wordley


    Scoring in every event for the last 12 comps running!
    http://www.monashmotorsport.com/

  7. #17
    Junior Member
    Join Date
    Aug 2006
    Location
    Queensland Australia
    Posts
    18
    Thanks Scott! and everyone else for their updates!

    Good luck everyone!
    ~~~~~~~~~~~
    Cheers

    plohl


  8. #18
    Thank all of you for updating stuff!!

    I couldn't afford to fly but donated team flag instead of my trip

    Go OFRAC!
    Ryota

    Osaka univ '05-'07 Power-train
    '09-'10 Turbo designing sec. #2
    '11- Turbine power plant designing sec.
    "Tuned car is fighter jet on the ground"
    SUZUKI ALTOWORKS '05-'10
    VW POLO GTI 9N '10-

  9. #19
    Senior Member
    Join Date
    Oct 2002
    Location
    Melbourne, Australia
    Posts
    372
    Hi guys,

    We are expecting a lot of rain near the start of enduro which means we can't run the laptop and webcam out on track this morning sorry.

    We will try to get someone posting updates and times.

    Cheers

    Scott
    Regards,

    Scott Wordley


    Scoring in every event for the last 12 comps running!
    http://www.monashmotorsport.com/

  10. #20
    Just use a plastic foil

    Regards,

    Tobias
    Regards,

    Tobias

    Formula Student Germany
    FSE Rules & Organisation
    http://twitter.com/TobiasMic
    http://TobiasMic.Blogspot.com

    Not many people know the difference between resolution and accuracy.

+ Reply to Thread
Page 2 of 14 FirstFirst 1 2 3 4 12 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts