+ Reply to Thread
Page 1 of 71 1 2 3 11 51 ... LastLast
Results 1 to 10 of 707

Thread: What is the status of your vehicle?

  1. #1
    Which phase is your vehicle in for the upcoming events: FSAE and FSAE-W?

    We are due to have rolling chassis this weekend.

    Thanks, Aaron
    fsae.sdsmt.edu

  2. #2
    We're goin to FSAE.

    We've been rolling since Dec 19th or so...hopefully driving under its own power for the first time this or next weekend. Still got a ways to go on bodywork, seat, basically everything not absolutely necessary for the car to drive.

    This is after not having the car done until approx May 10th last year.
    Ross Nickerson
    University of Pennsylvania '09
    Team Leader/Engine/Chassis/Suspension

  3. #3
    We're going to FSAE West

    We're shooting for a driving car by April 1st, but you couldn't tell by looking at the car right now. The next few weeks should be interesting.

  4. #4
    Kettering is going to Detroit.

    We're still in the thinking phase.
    Kettering University FSAE Alumni

  5. #5
    no go on a car this year....
    I will be racing the dyno setup I am working on, so watch out
    Mike Duwe
    UWP Alumni

    Former Drivetrain Leader and Team Captain

  6. #6
    Finished chassis on the table... Sub components being manufacutred. Engine being spec'ed. Aero Package prototypes undergoing testing.

    Yeah... It could be another one of those last minute years for us. Last year, we were working on the car up to the night before we left for Detroit.
    Tony Sartor
    05'-07' Project Director/Baja Team Motivator
    Iowa State Formula SAE

    "Nothing that was good went into that car!"

  7. #7
    MTU shooting for a car around the second week of April, but that could be sketchy....

  8. #8
    frame 99% complete (need 2 more members added), seat is done, front suspension has all its parts on a shelf minus uprights, shocks are dynoed, engine intake almost done, dyno a few days of solid work from being ready, competition motor on its way back from getting worked on, aero testing in progress, body started, drivetrain is finishing diff housing, covers, and bearing blocks this weekend, conrols has parts on the shelf waiting to be installed...i think that covers most of it for us (UNH Precision Racing)
    B. Bell
    UNH Precision Racing
    www.unh.edu/fsae

  9. #9
    Originally posted by afroney:
    Finished chassis on the table... Sub components being manufacutred. Engine being spec'ed. Aero Package prototypes undergoing testing.
    Aero Package I like the sound of that.
    are you planning to run it in fsae or are you developing it for scca?
    University of Oklahoma alum
    Sooner Racing team...sae.ou.edu
    " I see no point in being the richest man in the cemetery."
    "Bail!! Bail!!"

  10. #10
    From what I've been told, rolling in a week is the goal.
    Campus policies left students shooting back with camera phones. Life's worth more than pictures.
    www.ConcealedCampus.com

+ Reply to Thread
Page 1 of 71 1 2 3 11 51 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts