+ Reply to Thread
Page 9 of 12 FirstFirst ... 7 8 9 10 11 ... LastLast
Results 81 to 90 of 116

Thread: Best FSAE movies

  1. #81
    New video of onboard footage of us training drivers - as well as testing shift cut.

    http://vimeo.com/26119256

    We'll be testing quite a bit in the coming weeks - so we'll be posing new videos on our twitter stream over the next few days (@UTS_Motorsports)

    --

    Pete Ringwood
    UTS Motorsports
    UTS, Sydney, Australia

  2. #82
    Some say: Electric cars are not exciting http://www.youtube.com/watch?v=OWCvAWNqzPs
    are they?

  3. #83
    This is not a "Best FSAE movie", but since people seem to be posting their own uni's videos up to this thread, I'll add some pretty current video footage from Melbourne Uni: MUR FSAE2011: Francois' chassis

    There are lots more videos in my channel, though most are boring GoPro vids of drivers doing laps around Silhouette Karts.

    I'll try to get more footage on a very regular basis, so that people have lots of new vids to look at - I know I spend a lot of time on YouTube looking for new FSAE videos

    Sorry for the background music.
    Rex Chan
    MUR Motorsports (The University of Melbourne)
    2009 - 2012: Engine team and MoTeC Data acquisition+wiring+sensors
    2013 - 2014: Engine team alumni and FSAE-A/FStotal fb page admin/contributer

    r.chan|||murmotorsports.com
    rexnathanchan|||gmail.com
    0407684620

  4. #84
    Senior Member
    Join Date
    Oct 2009
    Location
    San Antonio, TX
    Posts
    467
    Props to KBB for putting this FSAE Cali 2011 video together: http://www.youtube.com/watch?v...iDcc&feature=related

    Pretty proud of my drift, calibration, and muffler design at 0:51. Haha.
    -----------------------------------
    Matt Birt
    Engine Calibration and Performance Engineer, Enovation Controls
    Former Powertrain Lead, Kettering University CSC/FSAE team
    1st place Fuel Efficiency 2013 FSAE, FSAE West, Formula North
    1st place overall 2014 Clean Snowmobile Challenge

  5. #85
    Senior Member
    Join Date
    Jun 2009
    Location
    Stuttgart
    Posts
    150
    obviously not the best video of our team , but still not a bad one:

    http://www.youtube.com/watch?v=NVFGZWmWzWk

    our current car at ZF Racecamp

  6. #86
    More videos of what's going on at Melbourne Uni/MUR Motorsports: Melbourne Uni FSAE 2011: Waiting for Kevin S (and drinking coffee)

    Now that I've got my own HD video camera, I'll be taking a lot of short videos and uploading the footage to YouTube.

    We are in the process of building our 2011 car, so expect lots of progress.
    Rex Chan
    MUR Motorsports (The University of Melbourne)
    2009 - 2012: Engine team and MoTeC Data acquisition+wiring+sensors
    2013 - 2014: Engine team alumni and FSAE-A/FStotal fb page admin/contributer

    r.chan|||murmotorsports.com
    rexnathanchan|||gmail.com
    0407684620

  7. #87
    Just some more footage from today, doing the finishing welds on the exhuast: Framcois welding the exhaust port adapters (sliding camera)

    And in the dyno, reattaching the servo motor arm after the new power supply applied too much torque and yanked the arm off the spline shaft: Kah Shen fixing the servo motor arm.
    Rex Chan
    MUR Motorsports (The University of Melbourne)
    2009 - 2012: Engine team and MoTeC Data acquisition+wiring+sensors
    2013 - 2014: Engine team alumni and FSAE-A/FStotal fb page admin/contributer

    r.chan|||murmotorsports.com
    rexnathanchan|||gmail.com
    0407684620

  8. #88

  9. #89
    Here are some more videos from last week or so:

    Melbourne Uni FSAE 2011: APV crushed IAs from crash testing

    Melbourne Uni FSAE 2011: Machined parts from OEM Engineering (EDM Wirecut CV/tripod housings and rotor carriers)

    Also, if anyone would like videos of certain things, just let me know, and I'll try to remember to get a clip of it.
    Rex Chan
    MUR Motorsports (The University of Melbourne)
    2009 - 2012: Engine team and MoTeC Data acquisition+wiring+sensors
    2013 - 2014: Engine team alumni and FSAE-A/FStotal fb page admin/contributer

    r.chan|||murmotorsports.com
    rexnathanchan|||gmail.com
    0407684620

  10. #90
    Exciting news from Melbourne Uni: the 2011 is almost finished (deadline was this Saturday), but due to a broken hub that needs to be remade, this has been pushed back a week or so.

    Anyway, the engine was run in the 2011 car for the first time on Wednesday. No major dramas (fuel line leak was found & fixed when test priming the fuel system; a cooling hose leaked when the water temps rose, was determined to be incorrect placement of a hose clamp, and suitably fixed). Here are the vids:

    Melbourne Uni FSAE 2011: First Engine Run

    Melbourne Uni FSAE 2011: Second Run after fixing cooling leak

    Melbourne Uni FSAE 2011: Hashan Revving the engine
    Rex Chan
    MUR Motorsports (The University of Melbourne)
    2009 - 2012: Engine team and MoTeC Data acquisition+wiring+sensors
    2013 - 2014: Engine team alumni and FSAE-A/FStotal fb page admin/contributer

    r.chan|||murmotorsports.com
    rexnathanchan|||gmail.com
    0407684620

+ Reply to Thread
Page 9 of 12 FirstFirst ... 7 8 9 10 11 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts