wat size did u use for wheel studs..?
wat size did u use for wheel studs..?
wat size did u use for wheel studs..?
Urz so dumb. Lawls!
Michigan State University Driveline Since 2005
We decided to use the same size as our piece of string.
First we picked our wheel wenches, then we picked our wheel studs. Order matters in this case.
we use 560mm hydroxyltitaniumcobaltumferrum spindles with Timken double row peanut bearings.
or you can find a CAD drawing of the wheel you're planning to use and measure it to design the studs
-----------------------------------
Drivetrain Leader 07-08
Technical Director 08-09
Team FSAE USB - Caracas - Venezuela.
You're seriously using wheel studs? A guy on our team did the shear force calculation on those and they're weak. We'll be welding our wheels to our hubs this year.
Conor Riordan
Lincoln Design Judge 2013
Michigan Design Judge 2012, 2014
Notre Dame 2009
WMU Team Captain 2008
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Conor:
You're seriously using wheel studs? A guy on our team did the shear force calculation on those and they're weak. We'll be welding our wheels to our hubs this year. </div></BLOCKQUOTE>
Same here.
----
Mike Cook
It's an engineering competition, not an over-engineering competition!
The hub's still too weak. Weld it to the upright.
you guys know nothing about race car design...
weld the uprights to the driver's butt
-----------------------------------
Drivetrain Leader 07-08
Technical Director 08-09
Team FSAE USB - Caracas - Venezuela.