 |
|
|
Hey Guys,
I realise I posted this a while a go, but recently I've been seeing some traffic on ackermann steering. This will provide some food for thought,
http://www.chassissim.com/blog...and-food-for-thought
In the end I do set a challenge for you. Let me give you a hint. Take the car speed at say 30 km/h, 60 km/h and 100 km/h. Assume lateral acceleration at say 1g. Crunch the numbers at those speeds and see where it works out.
Enjoy Guys
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
This week I had the pleasure of being schooled in one of my interests by the best in the world at what they do.
It really rammed home the importance of knowing your basics in order to succeed. In that vein I realise this is a retread but I think you guys might get some use out of this,
http://www.chassissim.com/blog...onnecting-the-dots-2
It's about connecting the dots with regards to simulation.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Awesome! I love learning, please don't stop making these!
mono
Hey Guys,
Mono - many thanks for the compliment. I'll keep up the good work. Over the last couple of years I have been writing for Racecar Engineering and contributing to this forum. I have written on many aspects of race car vehicle dynamics and how you can use it. It's also something I have genuinely enjoyed doing.
Guys I have some exciting news for you. It's time for you to apply this knowledge and what better way of doing it then through a competition,
http://www.chassissim.com/blog...l-online-competition
We at ChassisSim are running a competition using ChassisSim Professional Online to model an F3 car. Also there's a pretty big carrot on offer here. You'll find more information on the link.
Registrations are due by March 1, Final submissions March 21. Knock yourselves out and I look forward to your entries.
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
From time to time you'll be presented with a scenario when you have incomplete data. This video tutorial offers some tips and tricks about what to do about it,
http://www.chassissim.com/blog...ings-dont-go-to-plan
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
I'm just letting you all know that ChassisSim v3.20 has just been released. Click here to find out more,
http://www.chassissim.com/blog...-in-chassissim-v3-20
Also just a note. Quite a few of you have registered for the ChassisSim professional Online competition. Just to let everyone know I am cutting of entries after March 1. Consequently if you want to participate in the competition register sooner rather than later. Forgive me for the repetition but the details can be found here,
http://www.chassissim.com/blog...l-online-competition
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
I've just posted this video on tips and tricks on how to create aeromaps from race data,
http://www.chassissim.com/blog...ling-tips-and-tricks
It encapsulates what we at ChassisSim have learnt about aero modelling over the last couple of years. You'll get a lot out of this so enjoy.
Also just to give everyone a reminder, I'm cutting off entries for the ChassisSim competition on March 1! That is tomorrow aka Friday afternoon! However I will make Friday afternoon March 1 5:00pm Californian time. I look forward to your entries.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Recently I've been getting alot of questions on aeromapping and how you represent the aero of a race car. I realise I've posted this before, however this is something you can still get quite a lot out of,
http://www.chassissim.com/blog...d-aero-in-chassissim
Also for those of you competing in the ChassisSim Online competition it might be of interest to you.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
This was an article I wrote for Racecar Engineering a few months a go,
http://www.chassissim.com/blog...of-hand-calculations
It's about how to do hand calculations and I have some worked examples. I wrote it for all of you so I hope you get something out of it.
Enjoy,
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Over the last couple of weeks I've been getting a lot of questions on how to get the most out of tyre rig test results. I hope the following is of some help,
http://www.chassissim.com/blog...yre-test-rig-results
Also I just wanted to take this opportunity to issue a congratulations to ChassisSim customers PR1 motorsports on their class victory at Sebring. You can find more details about this here,
http://www.chassissim.com/blog...gory-at-sebring-2013
Enjoy Guys
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Posting Permissions
Reply With Quote