+ Reply to Thread
Page 1 of 29 1 2 3 11 ... LastLast
Results 1 to 10 of 283

Thread: A new free vehicle dynamics resource - Dan's Vehicle Dynamics Corner

  1. #1
    Hey Guys,

    It's Danny Nowlan here the Director of ChassisSim Technologies.

    Just to let you all know I've established a new series of videos on the ChassisSim YouTube channel called Dan's vehicle dynamics corner. This has reflections about the lessons learnt developing and using ChassisSim in fields as diverse as GP2, F3, V8 Supercars, the IRL, ALMS and many other categories.

    When it comes to designing your cars and tuning them these videos will give you good food for thought.

    Here's the link for the inaugural one,

    http://www.youtube.com/watch?v=kpjUPuk2cqE

    As I put more videos on I'll let you all know.

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

  2. #2
    Nice initiative!

    The video seems to be cut a bit short though as it ends mid sentence.
    Pontus Fyhr - Lund University Formula Engineering alumn/assistant FA

  3. #3
    Hey Guys,

    This strictly isn't about vehicle dynamics, non the less it's some data logging basics you guys might bet a bit out of,

    http://www.youtube.com/watch?v=rvtLfpqLnJU

    This time I've left spaces at the end so the speech shouldn't be cut off.

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

  4. #4
    Hey Guys, I've just posted a new video on Dan's vehicle dynamics corner. Here's the link,

    http://www.chassissim.com/blog...ar-data-and-dynamics

    My apologies for the direct link to the ChassisSim site. Due to the video length I had to split it over two videos. This makes it more convenient to watch the two of them together.

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

  5. #5
    Hey Guys,

    I've combined a ChassisSim tutorial with Dan's vehicle dynamics corner,

    http://www.chassissim.com/blog...r-laptime-simulation

    This shows you how to create aeromaps using a new feature called Aero surface fitting. Again my apologies for the direct link to the ChassisSim site. I've had to split it over two videos again.

    This is something everyone should get a lot out of. I'll be outlining how to use this in the upcoming Data and Dynamics seminars - www.dataanddynamics.com

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

  6. #6
    Hey Guys,

    I've got a new episode of Dan's Vehicle Dynamics Corner,

    http://www.youtube.com/watch?v=D2VR_B_ojMc

    It's about evaluating Lateral load transfer at the front and some thought about how to use it.

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

  7. #7
    Hey Guys,

    While this isn't strictly a Dan's Vehicle Dynamics Corner I think it's something everyone will get something out of,

    http://www.chassissim.com/blog...-race-car-simulation

    It's about using the ChassisSim v3 tyre approximation. I've put the link on my website because there is a pdf that accompanies this as well.

    All the Best

    Danny Nowlan
    Director
    ChassisSim Technologies

  8. #8
    Hey Guys,

    This is a follow up post from my last post that talked about the ChassisSim v3 tyre approximation,

    http://www.chassissim.com/blog...ion-using-chassissim

    It's a tutorial about how to use the ChassisSim tyre force generation toolbox. I think it will give you guys a taste that creating tyre models is actually quite doable from race data.

    Enjoy.

    Danny Nowlan
    Director
    ChassisSim Technologies

  9. #9
    Hey Guys,

    Just giving you all a community service announcement I haven't posted anything new for Dan's Vehicle Dynamics corner this week. I have been insanely busy.

    That being said if you need your fix, visit the ChassisSim blog,

    http://www.chassissim.com/blog/

    There are now quite a few good articles/videos on there so explore to your hearts content.

    Also another community service announcement. For those of you based in Australia, the slots for the Sydney Data and Dynamics Seminar are filling fast. This year it is shaping up as a veritable who's who of Australian motorsport engineering so it's definately worth your while being there. The student price is only $295 so it's more affordable than ever. I just don't want you to miss out.

    All the Best

    Danny Nowlan
    Director
    ChassisSim Technologies

  10. #10
    Hey Guys,

    I've just posted this article on my blog that I think you'll all get a lot out of,

    http://www.chassissim.com/blog...o-difficult-to-drive

    It's about why a racecar is so hard to drive at the limit. This article came as a direct by product of a conversation I had with an IRL race engineer, and it first appeared in Racecar Engineering.

    For any of you intending to drive a FSAE car or race competitively you'll get a lot out of it.

    Enjoy

    Danny Nowlan
    Director
    ChassisSim Technologies

+ Reply to Thread
Page 1 of 29 1 2 3 11 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts