+ Reply to Thread
Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 72

Thread: BOOK LIST to reference for car design

  1. #1
    Hi all,

    I've put this list together last year, and made it available to guys on our team and will do the same this year. It's up to individuals to read the books. I have not read all the books on this list, so I don't know if they are all good, but I have looked through a lot of them.

    Please add other books to this list so that all may benefit. Thanks,

    1. Chassis Engineering/Chassis Design, Building & Tuning for High Performance Handling by Herb Adams

    2. Competiton Car Suspension: Design, Construction, Tuning by Allan Staniforth

    3. Race Car Chassis: Design and Construction [Powerpro] by Forbes Aird

    4. Engineer to Win: The Essential Guide to Racing Car Materials Technology or How to Build Winners Which Don't Break by Carroll Smith

    5. Tune to Win by Carroll Smith

    6. How to Make Your Car Handle by Fred Puhn

    7. Supercharging, Turbocharging, & Nitrous Oxide Performance Handbook [Powerpro] by Earl Davis, Diane Davis

    8. Maximum Boost: Designing, Testing, and Installing Turbocharger Systems by Corky Bell

    9. Turbochargers by Hugh MacInnes

    10. Supercharged! Design, Testing and Installation of Supercharger Systems by Corky Bell

    11. Four-Stroke Performance Tuning by A. Graham Bell

    12. Engine Management: Optimizing Carburettors, Fuel Injection and Ignition Systems by Dave Walker

    13. Fiberglass & Composite Materials: An Enthusiast's Guide to High Performance Non-Metallic Materials for Automotive Racing and Marine Use by Forbes Aird

    14. Racer's Encyclopedia of Metals, Fibers & Materials by Forbes Aird

    15. Competition Car Composites: A Practical Guide by Simon McBeath, Brian O'Rourke

    16. Race and Rally Car Source Book by Allan Stansiforth

    Cyclone Racing
    www.cyclone-racing.com/fhome.htm
    Iowa State University
    Project Director

  2. #2
    Here's a few more I found....

    17. Drive to Win: The Essential Guide to Race Driving
    by Carroll Smith

    18. Race Car Vehicle Dynamics (R146) by William F. Milliken, Douglas L. Milliken

    19. THE RACING & HIGH-PERFORMANCE TIRE, Using the Tires to Tune for Grip and Balance (R-351) by Paul Haney

    20. Inside Racing Technology: Discussions of Racing Technical Topics by Paul Haney, Jeff Braun

    21. Speed Secrets: Professional Race Driving Techniques by Ross Bentley

    22. Speed Secrets 2: More Professional Race Driving Techniques by Ross Bentley

    23. Inner Speed Secrets Mental Strategies to Maximize Your Racing Performance: Strategies to Maximize Your Racing Performance by Ross Bentley, Ronn Langford

    24. Going Faster! Mastering the Art of Race Driving by Carl Lopez, Danny Sullivan

    25. Ayrton Senna's Principles of Race Driving by Ayrton Senna

    26. Winning: A Race Drivers Handbook by George A. Anderson

    27. Data Power: Using Racecar Data Acquisition: A Practical Guide to: Selection and Setup Data Interpretation Trackside Operation by Buddy Fey

    28. Competition Car Data Logging: A Practical Handbook by Simon McBeath

    29. Advanced Race Car Suspension Development by Steve Smith

    30. Race Car Engineering and Mechanics (Book and CD ROM ed) [R-308] by Paul Van Valkenburgh

    31. Race Car Aerodynamics: Designing for Speed by Joseph Katz

    32. Competition Car Downforce: A Practical Handbook by Simon McBeath, Gordon Murray

    Cyclone Racing
    www.cyclone-racing.com/fhome.htm
    Iowa State University
    Project Director

  3. #3
    33 Chassis Design: Principles and Analysis Milliken 0768008263
    34 ACL Engine Manual 1991 0855666803
    35 Bosch Automotive Handbook 2000 0837606144
    36 How To Build Horsepower, 1990, Vizard, D., S-A Design Books, 0931472245
    37 Measurement Of Gas Flow By Means Of Critical Flow Venturi Nozzles, ISO 9300:1995
    38 Diffuser Data Book, Runstadler, P.W. 1975, Creare Inc., Technical Notes 186
    39 Flow patterns in venturis nozzles and orifices, Film.
    40 Claude Roulle Notes

  4. #4

    Join Date
    Feb 2003
    Location
    Melbourne, Victoria, Australia
    Posts
    168
    frank,

    Did you buy "Measurement Of Gas Flow By Means Of Critical Flow Venturi Nozzles"? Its bloody expensive.

    Cheers,

    Kirk Veitch
    Swinburne University of Technology

  5. #5
    iso standards should be in your library

    it only covers "choked flow" which you dont get with a naturally aspirated engine

    but gives you an insite into how these things work

  6. #6
    Dick Golembiewski
    04/04/2002


    Vehicle Design/Dynamics References



    General:

    Bastow, Donald, & Howard, Geoffrey, Car Suspension and Handling, 3rd Ed. Pentech Press, 1993. ISBN 1-56091-404-1 (Available through SAE)

    Cole, David E., Elementary Vehicle Dynamics. University of Michigan, 1972. (Unpublished, used as course notes.)

    Costin, Michael, & Phipps, David, Racing and Sports Car Chassis Design. Robert Bentley, 1969.

    Dixon, John C. Tyres, Suspension and Handling. Cambridge University Press, 1991. ISBN 0-521-40194-1

    Ellis, J.R., Vehicle Handling Dynamics. MEP, 1994. ISBN 0-85298-885-0

    Gillespie, Thomas, Fundamentals of Vehicle Dynamics. SAE, 1992. ISBN 1-56091-199-9.

    1994 Motorsports Engineering Conference Proceedings, Volume 1: Vehicle Design Issues. SAE, 1994. ISBN 1-56091-570-6.

    1996 Motorsports Engineering Conference Proceedings, Volume 1: Vehicle Design Issues. SAE, 1996. ISBN 1-56091-894-2

    Milliken, William F. & Douglas L., Race Car Vehicle Dynamics. SAE, 1994. ISBN 1-56091-526-9.

    Milliken, William F. & Douglas L., Chassis Design: Principles and Analysis. SAE, 2002. ISBN 0-7680-0826-3

    Reimpell, Jornsen & Stoll, Helmutt, The Automotive Chassis: Engineering Principles. SAE/Edward Arnold, 1996. ISBN 1-56091-736-9.

    Smith, Carroll, Tune To Win. Aero Publishers 1978.

    Staniforth, Allan, Competition Car Suspension: Design, Construction, Tuning. Haynes, 1988. ISBN 0-85429-645-X

    Taborek, Jaroslav, Mechanics of Vehicles. Penton, 1957.

    Terry, Len & Baker, Alan, Racing Car Design and Development. Robert Bentley, 1973. ISBN 0-8376-0080-4.

    Van Valkenburgh, Paul, Race Car Engineering & Mechanics, 2nd Ed. (H.P. Books), 1986. Updated 1992. ISBN 1-55788-064-6

    Wong, J.Y., Terramechanics of Off-Road Vehicles. Elsevier, 1989. ISBN 0-444-88301-0.

    Wong, J.Y., Theory of Ground Vehicles. Wiley, 1978. ISBN 0-471-03470-3.

    Wong, J.Y., Theory of Ground Vehicles, 2nd Edition. Wiley, 1993. ISBN 0-471-52496-4.

    Wright, Peter, Formula 1 Technology. SAE, 2001. ISBN 0-7680-0234-6



    Braking:

    Baker, A.K., Vehicle Braking. Pentech, 1986. ISBN 0-7273-2202-8.

    Limpert, Rudolf, Brake Design and Safety. SAE, 1992. ISBN 1-56091-261-8.

    Puhn, Fred, Brake Handbook. H.P. Books, 1985. ISBN 0-89586-232-8.

    ABS Traction Control. SAE Publication SP-744, 1988.


    Tires:

    Clark, Samuel K. (Editor), Mechanics of Pneumatic Tires, 2nd Ed. U.S. Dept. of Transportation, National Highway Traffic Safety Administration, 1981. U.S. Govt. Reference #: 050-003-00377-8.

    Hays, D.F. & Browne, A.L., The Physics of Tire Traction. Plenum, 1973. ISBN 0-306-30806-1.

    Kummer, H.W. & Mayer, W.E., Unified Theory of Rubber and Tire Friction. University Park, PA.: Pennsylvania State University, 1966

    Moore, D.F., The Friction of Pneumatic Tyres. Elsevier, 1975. ISBN 0-444-41323-5.


    Transmissions:

    Aaen, Olav, Clutch Tuning Handbook. Aaen Performance, 1995. (Available Wrom: WIGYOKSTTZRCLBDXRQBGJSNBOHMKHJYFMYXOEAIJJPHSCRTNHG SWZIDREXCAXZOWCONEUQZAAFXISHJEXXIMQZUIVOTQNQEMSFDU LHPQQWOYIY

    Continuously Variable Transmissions for Passenger Cars. SAE Publication, PT-30, 1986. ISBN 0-89883-118-0.

    Stokes, Alec, Manual Gearbox Design. Butterworth/Heinemann, 1992. ISBN 1-56091-256-1. (Distributed by SAE)


    Fabrication:

    Finch, Richard, Performance Welding. Motorbooks International, 1997. ISBN 0-7603-0393-2.

    Finch, Richard & Monroe, Tom, Welder's Handbook. H.P. Books, 1985. ISBN 0-89586-257-3.

    Fournier, Ron, Metal Fabricator's Handbook. H.P. Books, 1990. ISBN 0-89586-870-9.

    Leavell, Stuart & Bungay, Stanley, Standard Aircraft Handbook. Aero Publishers, 1958. ISBN 0-8168-8500-1.

    Poberezny, Paul & Schmid, S.H., Aircraft Welding. Experimental Aircraft Association, 1991. ISBN 0-940000-49-0. (Note: The companion video, Building Your Own Airplane: Welding is highly recommended for the beginner.)

    Reithmaier, Larry, Aircraft Mechanics's Shop Manual. Palomar, 1981. ISBN 0-932882-00-5.

    Welding Aluminum. American Welding Society (The Aluminum Association), 1984. ISBN 0-87171-243-1.



    Safety:

    Henderson, Michael, Motor Racing in Safety. Patrick Stevens, LTD, 1968. ISBN 1-85059-024-8.

    Hunter, Harlen C. & Stoff, Rick, Motorsports Medicine. Lake Hill Press, 1992. ISBN 0-9634819-0-8


    Preparation:

    Smith, Carroll, Prepare To Win. Aero Publishers, 1975.

    Smith, Carroll, Engineer To Win. Motorbooks, International, 1984. ISBN 0-87938-186-8.

    Smith, Carroll, Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook. Motorbooks, International, 1990. ISBN 0-87938-406-9.

    Structures:

    Budinski, Kenneth G., Engineering Materials: Properties & Selection, 4th Ed., Prentice Hall, 1992. ISBN 0-13-2766353

    Fenton, John, Vehicle Body Layout and Analysis. MEP, 1980. ISBN 0-85298-445-6. (Distributed at one time by SAE)

    Noakes, Keith, Build To Win. Osprey, 1988. ISBN 0-85045-826-9. (Distributed by Motorbooks, Intl.)

    Noakes, Keith, Successful Composite Techniques.2nd Edition, Osprey, 1989. ISBN 0-85532-261-7. (Distributed by Motorbooks Intl.)

    Driving:

    Bondurant, Bob, Bob Bondurant on High Performance Driving. 3rd Edition, Motorbooks, Intl, 1993. ISBN 0-87938-751-3.

    Fittipaldi, Emerson & Kirby, Gordon, The Art of Motor Racing. Nutmeg, 1987.

    Frere, Paul, Sports Car and Competition Driving. Robert Bentley, 1992. ISBN 0-8376-0202-5.

    Jenkinson, Denis, The Racing Driver: The Theory and Practice of Fast Driving. Robert Bentley, 1959. ISBN 0-8376-0200-9.

    Johnson, Alan, Driving in Competition. Norton, 1979. ISBN 0-393-60011-4.

    Smith, Carroll, Drive To Win., Carroll Smith Consulting, 1996. ISBN 0-9651600-0-9. (GV1029 .S64 1996)


    Data Acquisition:

    Fey, Buddy, Data Power: Using Racecar Data Acquisition. Towery, 1993. ISBN 1-88109-601-7 (TL236.F52 1993)


    Aerodynamics:

    Abbott, Ira & Von Doenhoff, Albert, Theory of Wing Sections. Dover, 1959. ISBN 0-486-60586-8.

    Benzing, Enrico, Ali/Wings. Automobilia, 1991. ISBN 88-85880-38-X. (Distributed through Motorbooks Intl.)

    Craig, Gale M., Stop Abusing Bernoulli! How Airplanes Really Fly. Regenerative, 1997. ISBN 0-9646806-2-9

    Hoerner, Sighard, F., Fluid-Dynamic Drag. Hoerner Fluid Dynamics, 1965. (Available Wrom: ZUNNYCGPKYLEJGDGVCJVTLBXFGGMEPYOQKEDOTWFAOBUZXUWLS ZLKBRNVWWCUFPEGAUTFJMVRESKPNK

    Hoerner, Sighard, F. & Borst, Henry, V., Fluid-Dynamic Lift. Hoerner Fluid Dynamics, 1985. (Available Wrom: MBIPBARHDMNNSKVFVWRKJVZCMHVIBGDADRZFSQHYUCDDJBLVLM HAALPTCXLYRWTQTIPWIGYOKSTTZR

    Katz, Joseph, New Directions in RACE CAR AERODYNAMICS, Designing For Speed. Robert Bentley, 1995. ISBN 0-8376-0142-8

    Katz, Joseph & Plotkin, Allen, Low Speed Aerodynamics: From Wing Theory to Panel Methods. McGraw-Hill, 1991.
    ISBN 0-07-050446-6

    Hucho, Wolf-Heinrich, Aerodynamics of Road Vehicles. Butterworths, 1987. ISBN 0-408-01422-9. (Distributed through SAE)

    McBeath, Simon, Competition Car Downforce: A Practical Guide. Haynes, 1998. ISBN 0-85429-977-7

    Pershing, Bernard, Proceedings of the second AIAA Symposium on Aerodynamics of Sports and Competition Automobiles. Western, 1975. ISBN 0-87938-028-4.

    Rae, William & Pope, Alan, Low Speed Wind Tunnel Testing, 2nd Ed. Wiley, 1984. ISBN 0-471-87402-7.

    Scibor-Rylski, A.J., Road Vehicle Aerodynamics, Pentech, 1975. ISBN 0-7273-1805-5

    Sovran, Gino, Morel, Thomas & Mason, William, Jr., Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles. Plenum, 1978. ISBN 0-306-31119-4.

    Aerodynamics: Recent Developments. SAE, 1986. ISBN 0-89883-927-0.

    Aerodynamic Flow Visualization Techniques and Procedures. SAE, 1986. ISBN 0-89883-418-X.

    Analysis of Vehicle Aerodynamics. SAE, 1994. ISBN 1-56091-488-2.

    Automobile Aerodynamics; Wakes, Wind Effect, Vehicle Development. SAE, 1984. ISBN 0-89883-340-X.

    Automotive Aerodynamics. SAE, 1978.

    Automotive Wind Tunnel Design, Test Results, and Correlations. SAE, 1982. ISBN 0-89883-286-1.

    Closed Test-Section Wind Tunnel Blockage Corrections for Road Vehicles. SAE, 1996. ISBN 1-56091-815-2

    Research in Automotive Aerodynamics. SAE, 1988. ISBN 0-89883-674-3.

  7. #7
    Engine Management and Maximum boost are both excellent books. i also recommend those. currently im readng Fundamentals of vehicle dynamics. its a good primer, focussing on the loads and elements of motion the vehicle sees.

    If building a race car were easy, it would be called Your Mom.
    UCDformulaSAE
    http://mae.ucdavis.edu/~fsae

  8. #8
    Wow, I have a reading list for the rest of my life.

    Can I get any Clif Notes?

    Cyclone Racing
    www.cyclone-racing.com/fhome.htm
    Iowa State University
    Project Director

  9. #9
    Are you serious? Ayrton Senna wrote a book? I gotta get that too.

    Bob Mai
    University of Manitoba

  10. #10
    I was wondering if anyone can recommend books or papers that would be directly related to creating a dynamic simulation of an fsae car.
    Rutgers Formula Racing (05,06,07)
    Vice President

    Persistence...
    "Nothing in the world can take the place of persistence. Talent will not; nothing is more common than unsuccessful men with talent. Genius will not; unrewarded genius is almost a p

+ Reply to Thread
Page 1 of 8 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts