Hey guys,

Turns out the shop that rebuilt our motor failed to put on our Electromotive trigger wheel, and put the stock one back on instead. We haven't been able to get a hold of them, but will try again tomorrow.

In the meantime, does any team out there have a 60-2 tooth, 2-1/2" trigger wheel for the Tec3, splined to fit the Honda F4i crank?

If you have a spare you'd be willing to loan us, we'd appreciate it.

Contact can be made either thru the board, email me at venied@rpi.eduwww.formularpi.com, call my cell phone (914) 475-6326, or call our shop at (518) 276-6442.

Hopefully that shop finds ours tomorrow.

Thanks guys.