How can I find whole lsd drexler Cad? I found one that has no internal parts...
How can I find whole lsd drexler Cad? I found one that has no internal parts...
Try contacting Drexler.
It is quite common that suppliers don't give you detailed CAD models including the internals of their System. That is their know how and they don't want to make others able to produce the same parts. They give you a model with just the external geometry for the sake of packaging. From their Point of view that's all you Need.
Of course it doesn't hurt to ask them for a detailed model, but I'd be very surprised if they would be willing to give it to you.
Rennteam Uni Stuttgart
2008: Seat and Bodywork
2009: Team captain
GreenTeam Uni Stuttgart
2010: Seat and Bodywork / Lamination whore
Formula Student Austria
2012: Operative Team
There is a model available with internals. My team has it but without knowing where we got it I don't think I can upload it.
Tim is right; Drexler has provided a VERY detailed CAD to us, however I believe part of the agreement was not to share it with any 3rd parties.
---
Harry Bikas
UoP Racing Team
UoP Racing website
UoP Racing on Facebook
UoP Racing on Twitter
UoP Racing on Youtube
Beware of students from countries that are known to disrespect copyrights
Claude Rouelle
OptimumG president
Vehicle Dynamics & Race Car Engineering
Training / Consulting / Simulation Software
FS & FSAE design judge USA / Canada / UK / Germany / Spain / Italy / China / Brazil / Australia
[url]www.optimumg.com[/u
ctuna, Not worth to introduce yourself? At the supermarket I at least try to say hi and thank you to the cashier. This is more than just a supermarket; you introduce yourself here. Just a mark of politeness and courtesy to the people you ask help from .
Claude Rouelle
OptimumG president
Vehicle Dynamics & Race Car Engineering
Training / Consulting / Simulation Software
FS & FSAE design judge USA / Canada / UK / Germany / Spain / Italy / China / Brazil / Australia
[url]www.optimumg.com[/u
I am always more than happy to share our info . I have for the last 18 years, But it still amazes me when they ask for full spline data , material and hardness of our axles ... gets kind of old .
Very suspicious indeed....
Claude Rouelle
OptimumG president
Vehicle Dynamics & Race Car Engineering
Training / Consulting / Simulation Software
FS & FSAE design judge USA / Canada / UK / Germany / Spain / Italy / China / Brazil / Australia
[url]www.optimumg.com[/u
Yes you right! By the way guys I'm Cagdas from YTU RACING and working drivetrain department.
Thanks for ideas!
I found Cad data from drexler