Results 1 to 3 of 3

Thread: Engine mountings

Threaded View

  1. #1

    Engine mountings

    Hi everyone,

    My name is Etienne Couttenier, member of the Estaca Formula Team from Paris in France,

    We have a question regarding the engine mounts we've conceived; our engine, a three-cylinder block off of a triumph street triple and therefore quite
    imposing is fully included into the primary structure defined by the regulation (in between the main hoop and main hoop bracing) but one engine
    mounting hangs out at the back of the main hoop bracing. We are therefore wondering if the mounting needs to be triangulated and if so, are we allowed to
    triangulate it back to the main hoop bracing?side.jpgside 2.jpg

    It is a point (specifically T3.13.9) we are struggling to clarify among ourselves and some help would be greatly appreciated

    Thanks in advance
    Last edited by EFT; 10-10-2017 at 02:36 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts