+ Reply to Thread
Results 1 to 2 of 2

Thread: Wilwood Caliper CAD Model

  1. #1

    Exclamation Wilwood Caliper CAD Model

    Hello Everyone,

    We had a small problem here. We wanted to purchase WILWOOD DYNAPRO SINGLE PISTON calliper of piston diameter 1.38" with center distance between the mounts of 3.25"(MODEL NO.: 120-9688-LP). The 3D CAD model of the caliper is not available anywhere. If anyone of you has the CAD model of the same, please share it with us. We wanted it very urgently for our hub design.
    The drawings available on the website are not sufficient for manufacturing design. Also models available on GrabCAD are not specific as well.

    Here is our email id: teamoctaneracing2015@gmail.com

    Waiting for your reply.

    Sanath Salunkhe
    Team Octane Racing
    College of Engineering, Pune
    Last edited by wolf14; 04-13-2016 at 11:02 AM. Reason: Wrong mail id

  2. #2
    http://www.wilwood.com/PDF/Flyers/fl197.pdf


    Those calipers are huuuuuuge...
    Kettering University Vehicle Dynamics
    Formula SAE 2010 - 2015
    Clean Snowmobile Powertrain 2012 - 2015

    Boogityland 2015 - Present

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts