+ Reply to Thread
Results 1 to 2 of 2

Thread: "Yamaha YZF-R6 2009" Base map

  1. #1

    Unhappy "Yamaha YZF-R6 2009" Base map

    hello everybody
    can you help me please
    i have link G4+ and the engine is "Yamaha YZF-R6 2009" i want base map for it, because i searched for it and i didn't found any thing
    can you tell my where i can fiend the base map ?
    thank you all

  2. #2
    Senior Member
    Join Date
    Sep 2002
    Location
    Perth, Western Australia
    Posts
    717
    beshr,

    You will most likely need to make one yourself. A decent understanding and maybe some basic simulation (i.e, dynomation) will probably get you close enough to start and get running. If you have been running other 600cc engines you could probably start it off something similar (adjusting timing etc to suit location of triggers).

    Just remember to go really slow when you start tuning. Work up slowly through the rev range, focusing on low throttle low rpm regions and working up. These engines are pretty resistant to being damaged in these running conditions, meaning bad ignition and fuel settings are likely to make it run poorly or not at all rather than causing catastrophic failures.

    Kev

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts