+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: Doubt in Air Intake Rules

  1. #11
    Senior Member
    Join Date
    Jan 2009
    The rule has to be interpreted as Drew described. If your intake is lower than 350mm you have to use tubing for your rear frame of the same dimension as for the side impact protection. As this is quite a big weight penalty you probably want to avoid that...
    Rennteam Uni Stuttgart
    2008: Seat and Bodywork
    2009: Team captain

    GreenTeam Uni Stuttgart
    2010: Seat and Bodywork / Lamination whore

    Formula Student Austria
    2012: Operative Team

  2. #12
    Just to add to the above statement.

    You would likely be told by a rules inquiry to use triangulated tubing on both sides and behind the turbo that met the size requirements of side impact tubing, but that those tubes would not be required to meet up with the roll hoop.
    2010-2011 Chassis/Welder
    2011-2012 Tech Director
    2012-2014 Project Manager/Welder

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts