+ Reply to Thread
Results 1 to 2 of 2

Thread: Minimum wall thickness of aluminum tubes

  1. #1

    Minimum wall thickness of aluminum tubes

    Rule T3.7.1 says: Minimum Wall Thickness: Aluminum Tubing 3.0 mm (0.118 inch)

    The rule is in the chassis chapter, alternative frame rules chapter. Does this also apply to aluminum tubes used in other parts than the chassis? I was planning to use thinner wall tubes in the suspension system (2.5 mm). Is that sufficient or do I need 3.0 mm wall tubes?

  2. #2

    Thickness of Aluminium Tube

    Do you really have to ask? Think! What section of the rules are you reading? And then think again.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts