+ Reply to Thread
Page 14 of 16 FirstFirst ... 4 12 13 14 15 16 LastLast
Results 131 to 140 of 154

Thread: Shared CAD Files Library for FSAE

  1. #131
    Please let me know what should be the capacity of fuel tank if we are using honda cbr 600f4i .
    Thanx for your help in advance.

  2. #132
    Apart from posting this question in the wrong thread Diablo from Bhopal, how big do you think the tank should be?

    Pat
    The trick is ... There is no trick!

  3. #133
    Can anyone provide me the cad model of check valves & fuel rail of Honda CBR 600 f4i engine.
    Any help regarding this would be greatly appreciated.

  4. #134
    Junior Member
    Join Date
    Jan 2013
    Location
    Houston, TX
    Posts
    18
    CAD library link from the first post is down for me. Anyone else?

  5. #135
    Originally posted by Alex J.:
    CAD library link from the first post is down for me. Anyone else?
    Yep, same for me....was working a week or two ago.
    Wayne State University Formula SAE [Warrior Racing]

    2015 - Technical Advisor (Engine - Calibration Lead) "Old Man Jenkins"
    2013-2015 - Powertrain Director (Engine - Calibration /Electrical Lead)
    2012-2013 - Engineering Captain (All the things)
    2011-2012 - Cooling/Exhaust Lead

  6. #136
    Does anyone have the CAD file for this Wilwood caliper? Or anything similar.

    Caliper

  7. #137
    Junior Member
    Join Date
    Jan 2013
    Location
    Houston, TX
    Posts
    18
    If you just need a place-holder, the dimensional drawings for the Dynapro single are at the link you posted. It wouldn't take more than a few minutes and a couple of extrudes to create a mock-up.

  8. #138
    Yea thats what I ended up doing, at first glance i thought it would be a bit more complicated. But it was simple enough.

    Thanks for the suggestion.

  9. #139
    Junior Member
    Join Date
    Jan 2013
    Location
    Houston, TX
    Posts
    18
    Anytime.

  10. #140
    Did anyone manage to scoop up the 07 CBR 600RR Model before the link went down? If you could, please send it my way at ec8540@wayne.edu
    Wayne State University Formula SAE [Warrior Racing]

    2015 - Technical Advisor (Engine - Calibration Lead) "Old Man Jenkins"
    2013-2015 - Powertrain Director (Engine - Calibration /Electrical Lead)
    2012-2013 - Engineering Captain (All the things)
    2011-2012 - Cooling/Exhaust Lead

+ Reply to Thread
Page 14 of 16 FirstFirst ... 4 12 13 14 15 16 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts