I'm going to guess you need to move your steering arm point farther out horizontally from vehicle centerline.
Make yo shit work first before you go about designing your desired/perfect geometry.
 |
|
|
|
|
|
|
|
Type: Posts; User: BMEP
I'm going to guess you need to move your steering arm point farther out horizontally from vehicle centerline.
Make yo shit work first before you go about designing your desired/perfect geometry.
Z,
You are crazy. I like you
Alright another idiot question. I vaguely understnad what is being talked about, (too early to think properly) but what about when people are claiming they have 150%,200%, 50% etc. ackermann. The...
Maybe I'm just another dumb idiot but how are yall defining what is %100 ackermannn or a certain percentage. Sure there is the classic KPI/tierodBJ/Center of rear axle trick but that doesn't account...
Both work with some tinkering, I'd say it all really depends on your packaging constraints/preferences. Don't forget about full lock conditions with front steer as you might have to run "J-hook/non...
Alright, I don't understand much about computers/spambots so bare with me. Where do these Spambot widgets get there information to reply? These latest posts are rather entertaining
Almost meets the cc limit:
http://www.dieselpowermag.com/...is_fusion/index.html
Your answer is a search away on Ebay for a used front driveshaft from a polaris,Honda, etc. quad.
Some shifter karts use mechanical flappy paddle shifters, take a look at some of those designs as they are close to what you are describing
The problem is only in 2nd? Or is it the 1st - nuetral - 2nd shift that is the problem? Any problems when shifting from 3rd to second?
Does it slip or jump - theres a big difference. If its...
Don't forget that Adrian college is close by, lots of tail to be had at that place http://fsae.com/groupee_common/emoticons/icon_smile.gif
before the sarcasm comes in, are you trying to say your idle is to high?
Oh about that michigan weather... there was about 6 inches of snow that accumulated monday morning this week and the majority of it was melted before I got home from work that afternoon. In michigan...
Guess what just go emailed to Sedra.... Nice link http://fsae.com/groupee_common/emoticons/icon_smile.gif
When is the FSAE bikini calender coming out
I think you have a few options here:
Option 1
All you have to do is convince your supplier to make tooling to roll form the optimum OD pipe. It shouldn't be a problem as you only need roughly...
Harder to take out cones with the rear wheels when the rear has a smaller track
^^^ It looks like that Vee Eight is magically floating...
These search rant posts sure do get annoying, if you don't intend to try and help out why do you even post.
What do you consider good range?
For example, If your wheelbase is 60" and the line drawn from the steering arm through the steering axis intersects the center of the car at 120", this would be considered 50% ackerman. If the line...
There is a method by tilting the car laterally and longitudinally for determining cg height.
http://www.longacreracing.com/...les/art.asp?ARTID=22
Draw an infinite line between the differential and the steering axis. If the steering arm joint lands anywhere on the infinite line constructed, it is considered to be 100% ackerman.