https://www.avl.com/open-jobs?p_p_id=avljobdbfrontend1_WAR_avljobdbportlet_INSTANCE_NIzBc623DqUz&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&p_p_col_id=column-1&p_p_col_count=1&_avljobdbfrontend1_W...
Type: Posts; User: M. Nader
https://www.avl.com/open-jobs?p_p_id=avljobdbfrontend1_WAR_avljobdbportlet_INSTANCE_NIzBc623DqUz&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&p_p_col_id=column-1&p_p_col_count=1&_avljobdbfrontend1_W...
Hello all,
I have spent my study years starting Formula student in my University and making sure that my team can compete, just a quick introduction about myself is that I was (along with a...
While Engineering is part of the problem, my opinion is that it is only a very small part, the big problem i think the teams need to focus on is Management and there is plenty of help available but...
I don't think it is right to ban a class based on the incompetence of the Egyptian teams (mine included).
Class 2 is an opportunity for teams with bigger and well thought of plans and if done in a...
OBR, Delft and ETH all had problems in endurance. KIT were quick (Zurich fastest lap).
will be close this one
Thought i would give this a bump now since i am in a similar situation myself (Control Engineering Msc. Vs. Motorsporst Engineering).
Maybe i should follow my own advice
Soumya,
Thanks for your feedback, you have certainly raised some issues.
first off i have been looking at places where i can find a decent career, as an international student you must know that...
Thanks a lot Soumya, this is exactly the kind of feedback i was looking for. Yes, I am from Egypt.
You are right i do need an ATAS clearance and pay the international fees (now 13000 BGP), do you...
Hello all, i have already started a thread in the Off topic section about this issue, but till now that section remains mainly deserted by most forums so i thought to start a discussion here in the...
so i am now in the process of applying to continue my studies in the UK (Msc.).
So far i have received offers as follows:
University of Hertfordshire- Mechanical Engineering
Coventry- Control...
Not all of the mentioned above need to be on the same plane, easier in terms of force calculation yes but geometry can easily change the locations of the following without creating RIEB:
- The...
https://www.youtube.com/watch?v=Y5suNtLwbBw
What you actually need
I nearly fell off my chair reading this
First off let me just say that each will have his requirements so such a decision you will have to make pending your circumstances and needs.
an AE degree will be quite a constraint in terms of...
I always try to be helpful with rookie teams. even more with countrymen. Given that you are from my school i should be extra helpful, but you are not giving me that chance with such questions.
do...
Similar idea
https://pbs.twimg.com/media/BOZbAqMCYAAdzaH.jpg:large
Yes it is Pete http://fsae.com/groupee_common/emoticons/icon_smile.gif that outboard rodend, but it is really minimal in comparison to what we sometimes see in FSAE (The rod end would be a bit more...
William,
I initially hadn't looked for it as i came across the pic somewhere and just asked the poster to clarify my guesses a bit and went on. after some looking though here is a pic of how it...
I have eyes and a pencil and am able to draw free body diagrams.
Assuming the rod-ends were the bump stops, FSAE calls that poor design - not rod-ends in bending. </div></BLOCKQUOTE>
I am not...
Massive banking put things in an awkward geometry, bending the rod ends. that's what the owner confirmed with me.
How can you tell from the picture they weren't in bending? maybe you can make a...
https://pbs.twimg.com/media/BIT-XIsCQAA22Ib.jpg:large
That's why the judges don't like them. just saw this and thought i'd post here
And make no mistake, it is one DEEP rabbit hole. make sure that you really need it and have the time before jumping in there. Even Mr. Milliken will tell you that.
Braking stiffness and cornering stiffness are largely surface independent. Small slip angles or slip ratios mean limited slip inside the footprint. Limited slip means friction isn't the primary...
Are you trying to calculate the max longitudinal force that can be used?
do you have access to the TTC?
can you estimate vehicle weight and weight transfer?
You can estimate you force by...