<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> We are very pleased with our M4. It has served us well for the past four...
Type: Posts; User: alfordda
Michael-
Correct me if I'm wrong, but I think that document is saying that the angle of Percy's neck must be between 0 and 8 deg from vertical rearward? The first time I read that I thought the...
Depends on what type of accel it is. If its a DC/capacitive type of accel (typically used in low frequency aplications, think vehicle dynamics), you just need to flip it over and record the voltage...
Well, I have never delt with another system, but I can't imagine there is a system that is easier to use than the PE system. And that doesn't say a thing about their tech support, I'm a suspension...
No B.J. has it about right. I've never tried to wire up the system so I don't really know how hard that is. But once its up and running, I could pretty easily make changes and troubleshoot at the...
I know that Cincy got theirs about a week and a half ago.
I happen to know, there is a thesis out here that might be useful, that is unless you are talking about the wireless part being the link between the sensor and the DAQ.
http://www.ohiolink.edu
Its called "curve by table" The icon has a table and a curve with a buch of points on it. It is in the flyout with the curve with a buch of points on it in the surfacing toolbar. If you are only...
Z is the author of The Steer-Axis article from Racecar Engineering? If so, thanks for writing that article I found it really useful, it kind of made things hit home for me.
I'm pretty sure you can do it in Matlab, but the data acquisition toolbox might be required.
If your numbers are coming in as strings someting like '3', you will probably need to use strrep before the str2num command.
We use Elmers glue, but I'd use the search function to find out what 3M or Hysol stuff everyone else is using. That is unless you want to glue it back on every 10 minutes.
Well, now it just looks like I'm lazy and didn't look far enough down the page. Do you know if they still make that tire, because I don't think our sponsor mentioned that one?
The Avon website does not show a 20x6.2-13, is this a mistake in the spreadsheet or the Avon website?
Its not limited to autox's. We've done some testing at a kart track, and they usually pull away in the twisties and we catch up in the straights. I'm sure a good formula car and driver combo could...
Yes, this is a very common techenology, and there are a few variations of it. The method we have used entails placing a photo reflective targets on the test object, and then take a bunch of digital...
I understand. I think our oil pan sits on the dyno frame. We run very hard race tires on our chassis dyno. Some guys inadvertantly ran our race tires on the dyno for about an hour last year. I...
James-
Whats up with those rear tires, they appear very narrow?
kozak-
Check your pm's.
MSC ADAMS
http://www.mscsoftware.com/support/university/student_competitions/templates/templates_main.cfm
I have to second Denny's comment. The Taylor Racing products are great. They have saved us alot of headaches. Thanks Craig.
I'm not sure what the deal is, but I emailed within a day or two from the original post, and have not heard anything either.
We test in the rain also. In fact our rain tires got more use last year than the slicks, at least until we went to the Texas Autocross Weekend.