Does anyone knows if the camping site will be held open during the seminar days?
Type: Posts; User: mangel83
Does anyone knows if the camping site will be held open during the seminar days?
You could get in touch with the people at Ricardo. They support the event and will give you few licenses of WAVE and limited support time if you put their logo on your car.
Ricardo
Hello Joey, as many said before this experience will change your lives. Good luck and enjoy!
Here are some links I think you may find useful:
FSAE Rules and important documents
Equipment...
Hey Mike,
I'm really interested in a position like this. I'd really appreciate if you could send me some more information: manuel.sanchezp(at)gmail.com
Thanks
A very old post this one, but what the hell... it's good to know what some mufflers are rated, if you know how they're tested. Yoshimura's RS-3 are rated 95 dB (20" away, at 45 deg from the tip, and...
Detroit
Steve, although brake test is not an acceleration run the scrutineers made us take the brake test 3 times, even though we managed to lock the wheels in the 1st and 2nd run. They told us that they had...
We used the stock pump of the bike for our engine this year (2003 Suzuki GSX-R600, internal, returnless). As Ian said, it kicked on and off as needed.
It worked great for us, until the day before...
We shipped our car from Venezuela with FEDEX, they were very helpful, try visiting your local FEDEX and see how can they help you.
Bret, if you could e-mail me those pics. masp1810.at.yahoo.com
...
http://www.imeche.org.uk/formulastudent/pdf/FS2006%20Of...s%20Class1_1_200.pdf
I'm from Venezuela, and the car racing industry here is practically non-existant, we have a karting series and a 1/4 mile drag racing series of modified stock cars that run on gasoline, with the...
I have a few doubts about turbine operation, anyone care to point me in the right direction?
How do I determine turbine operating point (expansion ratio & corrected gas flow). Turbotwig (kirk)...
Hey Dan G, I was looking at that spreadsheet you posted but I have some doubts about it, hope you could enlighten me.
When calculating the turbine corrected flow you use Exhaust Manifold Pressure...
Kirk, thanks for all the hints!
As for those hints:
1. I've been using EGT between 750ºC and 830ºC based mostly on what I've found in these forums, we have some thermocouples laying around in...
I have the aproximate air mass flow rate range through the compressor (based on %ve, density and engine's rpm), now with this values I go to the compressor map and with the corrected air mass flow...
What would be a reasonable volumetric efficiency for a 4 cyl. 600cc restricted motorcycle engine.. I'm guessing between 55%-65% depending on intake design?
And what volumetric efficiency should...
I was searching some info on EGT calculation and I found this equation in a spanish book:
egt = ( iamf / egmf ) * ( IT + ( LHV / (4 * afr * lambda * cp ) ) ) where:
iamf: intake air mass flow...
Does anyone by any chance have the panoramic photo in digital format? (jpg, bmp, or so)
If so please send it to masp1810.at.yahoo.com
thanks! (@ instead of .at.)
Edit: RacingManiac,...
thanks for the info
I was watching some photos of several FSAE teams and I noticed that almost all of them had the exact same electrical symbol sticker. Do you guys have a common source (to buy or download), are they...
I was watching some photos of several FSAE teams and I noticed that almost all of them had the exact same electrical symbol sticker. Do you guys have a common source (to buy or download), are they...
95 octane, $0.18 a gallon
Anyone care to share a decent 3D helmet model? Any file type works. SW, ProE, Inventor, STP, IGS, whatever you got. All I have is this crappy one, it's from 3D content central... I think.
If...
Anyone care to share a decent 3D helmet model? Any file type works. SW, ProE, Inventor, STP, IGS, whatever you got. All I have is this crappy one, it's from 3D content central... I think.
If...
Copy/paste the files to that ftp folder that opens up, it's that easy