You are a university student? If so you should be able to get it through your library's inter-library loan. It took my library 6 days to find, order and receive a copy of the book, and I can renew...
Type: Posts; User: JDF
You are a university student? If so you should be able to get it through your library's inter-library loan. It took my library 6 days to find, order and receive a copy of the book, and I can renew...
520 and 530 motorcycle sprockets have the same tooth profile as a series 50 industrial sprocket. Both are 5/8" pitch with a .400" roller. The 50 series are thicker, but that doesn't change the...
Are you using solid elements? If so you may want to try using either 2d area or beam elements. This will greatly reduce the DOF's, giving ANSYS a much easier bit of math to solve.
For most...
The Dillsburg Aeroplane Works
Aircraft-Race Car-Machine Shop-Raw Materials
Charles T. Vogelsong
114 Sawmill Road, Dillsburg, Pa 17019
(717) 432-4589
These guys seem to be one of the cheapest...
Well I lied. Can't find the file anywhere. If I still have my notes from it I'll put together another sheet, but the notes probably got tossed with the file...
I've got an excell sheet that generates involute profiles based on pitch, # teeth, etc. It just spits out a list of x,y coordinates which you can import into drawing. Not sure where the file is...
Yes "four wheeler" as in ATV. At the very least you would likely need to machine your own spindle, so this might not work out for you.
We have used four wheeler hubs on machined spindles. I believe we have used parts from both Polaris and Yamaha. Go to a couple of dealers and check out different models to see if there is anything...
dartmouth01
Sprocket Specialists carries a standard sprocket with the R6 spline. Its just a flat piece with no shoulders on it, so they don't list it for any particular bike. We used in for a...
If you try to order a 12 tooth sprocket for an F4i or R6 from SS they will tell you it is special order. After many emails I found that you can order a 12 tooth 520 flat sprocket off the shelf for...
I was on the exact same schedule here until I said to hell with the second part around 3:00. So the drinking got bumped up to 3:01. http://fsae.com/groupee_common/emoticons/icon_smile.gif
Had...
I'll be taking the FE this Saturday. Our department imposed deadline to have our car running is Friday. An eight hour test after a week of no sleep. I can take it again in the fall, right?...
Brian, thats brilliant. You're acutally the third person to recomend that. As much as I'd like to try it out, I got some slices of Durabar coming in Friday, so we're set.
Thanks for all the...
Of course you can get a good mig machine to weld as good as a TIG box, however I would be reluctant to use a MIG on 4130. The mig process heats a very small area of metal very rapidly, and allows it...
Looking for an SDS box as a replacment on an old car.
Anyone have a source for 3/16 or 1/4 cast iron plate for brake rotors? Tried all our usual source and came up empty.
Thanks
Anyone have a source for 3/16 or 1/4 cast iron plate for brake rotors? Tried all our usual source and came up empty.
Thanks
Well, Torsen removed the 27.5deg pressure angle from their page, but didn't replace it with anything. Once I hear from them to validate the correct angle, will draw one up and send it your way.
I found that page, but the 27.5 deg pressure angle is throwing me off. None of the information I've is for this angle. Seems someone has said that a 30 deg angle can be made to work, but would like...
Does anyone have a CAD drawing of the spline profile for the torsen? Need to get the shafts to the EDM shop soon... AutoCAD would be best, but I'll work with whatever I can get.
Thanks
TTU's formula team will be there. Probably no car, but hopefully we can get a presentation together this year. I'm looking forward to see how everyone else is doing.
Jeff
TTU Formula SAE
Miller gives our team great discounts, but this one is for my shop so it won't apply. I'm going down to Georgia to check one out this weekend so I may be set.
Thanks
JDF
Tennessee Tech...
Garbo
We have a set we can let go. Make me an offer at jdfoote21 @ tntech . edu
JDF
Tennessee Tech
Golden Eagle Motorsports
I'm looking for an AC/DC tig/stick machine with around 200 amp output. Single phase input prefered.
JDF
Tennessee Tech
Golden Eagle Motorsports
I'm looking for an AC/DC tig/stick machine with around 200 amp output. Single phase input prefered.
JDF
Tennessee Tech
Golden Eagle Motorsports