You might want to keep an eye on oil temps.
Type: Posts; User: civicsit
You might want to keep an eye on oil temps.
Might want to think about those backfires. If you spec it for absolute vacuum only, a backfire may crack or explode your plenum.
Thanks guys,
That was pretty much what I was looking for. Mainly hearing that a FSAE team had used the Honda, since most of them use Yamaha. We have some experienced motocross guys on our team, so...
We can't run a Suzuki/Kawasaki because of an availability issue.
We are currently looking at a new engine, and at the top of our list is a 450 single. More spec. Honda or Yamaha. The engines are very similar except for just a few differences. The Honda is a ...
We are currently looking at a new engine, and at the top of our list is a 450 single. More spec. Honda or Yamaha. The engines are very similar except for just a few differences. The Honda is a ...
We would be interested in seeing what type of deal you would be able to get. We would need 2-3 engines initially with one engine year after that. Also would need some common spare parts such as...
Maybe just personal preference, but from experience I would recommend staying away from halleffect sensors. They are not meant to be in hot oil baths, and we have had multiple problems with them...
In place of the water pump using a longer shaft to drive the dry sump.
You can't use the 12-1 tooth trigger wheel, haltech doesn't have trigger setups for it. We got a 12 tooth wheel laser cut for us, then put in a home signal on the cam. With this setup we use a 24+1...
Yea, sorry to say, but Bryan is right. The E11 will not do a 24-2 wheel. Our stock kawasaki was a 12-1 that we had to convert to a 12 tooth with a home on the cam. You could always try that, but it...
So is it a 24 tooth trigger wheel on the crank with a 2 trigger home on the cam? Does the crank trigger have any missing or elongated teeth? How are the home triggers put on the cam, 180deg. apart?...
Yea, we saw those. The engines in the pics there are the RXV's. We knew about that but just wanted to try and get the engine with the gearing that we would like.
We are currently looking into the Aprilia engine for future use. We need some help. Everyone that we talk to say that they need a part number for the engine, and that they can't find it. Could any...
We are currently looking into the Aprilia engine for future use. We need some help. Everyone that we talk to say that they need a part number for the engine, and that they can't find it. Could any...
Maybe there is some sort of restriction in the engine upstream of the oil filter that is causing such high psi. It may cause the engine to not get the oil it needs too.
Yea, just think about it. At what throttle position are you actually reaching full throttle? 75%? 50%? So how much throttle travel are you loosing that your driver could be using to better control...
40mm for a 20mm restrictor? Man, I just don't get it sometimes...
First off, dio, sorry for highjacking your thread.
Josh-
Sorry, I was a off on the E8/E11 difference. Since I was not involved in the ECU selection, I don't know exactly what the difference is. ...
We use the Haltech E8 currently. We previously ran the E11v2, but found that the added expense didn't give us any options that we needed or used. The ECU's can be very nice and the software is easy...
We got our nosecone cnc on a 4 axis mill out of foam. We then make a mold of fiberglass off of that. Then use the mold to make our carbon fiber nosecone. You can do the same with the sidepods.
Read Race Car Vehicle Dynamics.
We had a carbon intake do that after it got a little warm. Those backfires can cause damage all over the place.
That is a sweet video. Thanks for finding it. http://fsae.com/groupee_common/emoticons/icon_biggrin.gif