Yes,I do make a polt of Vehicle speed vs engine speed using different ratios.I found that the traction force that our engine could provide is far below the tire's(Hoosier tire) capacity. So we chose...
Type: Posts; User: Dualsaber
Yes,I do make a polt of Vehicle speed vs engine speed using different ratios.I found that the traction force that our engine could provide is far below the tire's(Hoosier tire) capacity. So we chose...
If you look back at the old Formula A motors they were running a lot higher than 10,000rpm, generally about 20,000rpm for the old rotary valves and screaming reids. As far as I am aware they used to...
You're planning to have some sort of clutch in there, right? You're going to have a very tough time at an autocross style event if you don't!
I don't want to tell you how to engineer your car, but...
Thank you kirk.
I understand this but we are using DIRECT drive.No gear box,No CVT,Only chains.
The load limit is not a problem.What will happen if the rpm of the spocket goes too high (about...
I was staying all night calculating......
Has any team ever trying to mount a spocket directly on the crankshaft?
We are a team from Fsae-China.
We are try to make a 2-level direct chain...
I'm at the Frame Design group in my team.
Some time I was wondering what is this work all about.Beacuse a lack of experience.We just know that we should design a frame according the rule.And at...
I'm at the Frame Design group in my team.
Some time I was wondering what is this work all about.Beacuse a lack of experience.We just know that we should design a frame according the rule.And at...
http://fsae.com/groupee_common/emoticons/icon_smile.gif
If you want a smooth exhaust,the exhaust length and the diameter of the exhaust tube need to be carefully designed.
We had deal with a 4...
I understand.We can still get a tolerable deformation if it's carefully positioned and welded.
You are right,we have more things to concerne about.We made two kart cars before,the first had a very...
http://fsae.com/groupee_common/emoticons/icon_smile.gifOne more question:Is the CNC bended tube more likely to have some unwanted deformation after welding?
Forgive my poor english ...
We are new here,planing to make our own fase car.But we encountered some welding problems.
How can we keep the welding deformation in a tolerable range.
We plan to use a welding platform together...
We are new here,planing to make our own fase car.But we encountered some welding problems.
How can we keep the welding deformation in a tolerable range.
We plan to use a welding platform together...
Thanks for the article.China will hold a event such as the FSAE this year.And it is a very helpful for our work.