Hey guys,
thanks for all the reply!!
We did it ourself! Saturnight we machined a part. On monday morning we broached it at a company in our town. Never thought that they have the fitting tool...
Type: Posts; User: Phil1988
Hey guys,
thanks for all the reply!!
We did it ourself! Saturnight we machined a part. On monday morning we broached it at a company in our town. Never thought that they have the fitting tool...
Hey everybody,
Need your Help! Our chain adapter from the Drexler LSD failed today on the dyno! We have NO part to replace it! Its the aluminium part with the teeth/ gears..
Does someone have a...
Hey everybody,
Got a little Question due to rule T6.6.2
-With the bottom of the tube 200 mm (7.9 in) above ground, the wheels do not touch the ground when they are in full rebound.
I...
Hey everybody,
got a few questions about weight transfer. Read a lot in the forum an in Millikens and Smiths book but it was not satisfying enough to me..
So a friend of mine was at the Optimum...
Thanks Gspeed for your help,
got close to the solution http://fsae.com/groupee_common/emoticons/icon_wink.gif
now i think the only problem i still have is at the beginning. Why do we need the...
Hey everybody,
got some questions to you allhttp://fsae.com/groupee_common/emoticons/icon_smile.gif
I've read the Postthree times.. But i still have problems to understand this genius thing.
...
Hey everybody,
got a important question. How do you arrange it that your supension geometry is the same as in the kinematic programs in the fabrication process?
As an example: How do you get...
Hey guys,
got a question due to the main hoop bracing.Attachet you can find a concept of our coming frame. Is it with the rules to attache the engine without any bracing or triangulation?
...
I have the problem of deciding whats the best at the moment.
My cooler has the dimensions of 300 *200 mm.
I decidet to take a fan with an diameter of 180mm to make the pressure loss as a...
Hey,
Has anybody CAD Data of the Bosch Sensors?
TPs RP86.
Regards Phil
Sorry. i mistaken something^^ the statement with the area of twice as large wasn't right. I was a bit jazzed^^..
So but if i mount the fan not direct on the core. i have a big nozzle. All the...
Im wondering a bit about the fan mounting.
So if i don't mount the fan directly on the core.
I assume as a example: A cooler with the dimensions of 300*200 and a fan with a diameter of Ø180mm....
Hey guys,
Got some question due tothe driveshafts.
We calculated the weight transfer and looked into the tire data. With the Hossier 10" LCO we came up with about 650 Nm per Wheel witch can be...
Thanks for the Information...
I know that we can't use the values of other teams.
Only to get some feeling of this value and so on. Not to take the thickness of other teams.
Thanks
Hey Guys,
got a question about the Brakes.
How thick are your Disks? Our last years car the disks were 5mm thick! Thebrakes did not get really warm. Only about 100 deg.
Our Plan is to go...
Hey Guys,
thanks for your replys.
We used a tube with an outer diameter of 42mm an 1mm wall thickness. Calculated on 450Nm torque.
#I remember an value of 7deg of torsion from munic two...
Hey guys,
got a question about the drivetrain.
How stiff are your axles? Whats the maximum torsion angle you calculated? Why do so much teams use axle made of full material? We use a big tube...
Hey guys,
got a little question about the braking system. Our team thinks about a single brake caliper in the differential to safe wight.
Does someone of you have some experience with this...
Hello Everybody,
we have a LM2 Lambdacontroller with the oxygen sensor, the inductive speed sensor nd the software to sell! All is completly new. Only one time used.
...
Hey everybody,
we have an new accusump oil pressure accumulator with the electronicaly valve to sell
Please contact me with PM
Regards Phil
Hi everybody,
Our Team has to sell:
4 Rain tires Hossier 20.0 x 7.5-13 Wet
4 Sliks Hossier 20.5 x 7.0-13 R25B
4 BBS rims 13" custom center look with all CAD Data and calculations for the...
Hey guys,
another question about the catch tanks
is it ok when the catch can is simultanius the reservoir of the coolant? On our catch can is a vent wich opens at a pressuere of 13000Pa. The...
Hey guys,
another question about the catch tanks
is it ok when the catch can is simultanius the reservoir of the coolant? On our catch can is a vent wich opens at a pressuere of 13000Pa. The...
Hey,
got a question to the drivers equipment:
We have four drivers in Hockenheim. Is it neccessary that every driver has a complete driver equipment? Two of our driver have the same stature and...
Hey,
got a question to the drivers equipment:
We have four drivers in Hockenheim. Is it neccessary that every driver has a complete driver equipment? Two of our driver have the same stature and...