Search:

concentric layer twisting?

KU will have '09 and probably '10 there. Maybe even another older car as well.

KU and TU Graz are in Semis.
Stuttgart isn't.
don't know about other schools.
UTA is rocking a turbo 250 single
MS&T has a strangely similar car

Hey guys, if any of you are interested Neil S. from UMR and I will be with Autocon Motorsport (LMP1) Thursday thru raceday. If you guys want to stop by and come check out the car feel free to swing...

Only when engine tuning is perfect for the different engine choices. For every team out there the engine tuning is good for driving the car but no where what it could be for driving the car and...

sticking my nose in here. single vs 4 cylinder vs bitch motor (ape...yes it is a bitch) and fuel economy vs power output.

This all comes down to Engine tuning. I actually rather like the new rule...

the rule of thumb for missing tooth trigger wheels is you want the first EDGE past the missing tooth to be TDC on the #1 cylinder. technically it doesn't really matter as long as you verify ignition...

Hey Buddy,
Just an fyi, the link you have to your blog in your signature has a comma at the end so we get a dead link when we click on it.

Thrainer. thanks for the interest in the car. Our website is one of the things that was on the back burner this year. we hope to have it updated soon and provide proper updates through out the coming...

i got the opportunity to watch the oregon state guys use a ball peen hammer to 'straighten' one of the repair plates to the front suspension by beating it against the chassis. Looks like you might...

Matt, where do you find these things?

the tuneboy starting map has really small numbers. are they a injector pulsewidth of running map or what?

we are using a Euro4, by EFI technologies on our 09. the 08 car used an AEM.

is the engine running or cranking when it stops. In an effort to save starters aprilia put something into the ecu that limits cranking time.

the risse's we got for our 04 car leaked everywhere. they have been crap for a while

the injectors that come stock on the sxv550 are 240 cc/min.

Do the cams still have the caps in both ends? I've seen this kind of failure before, we had it happen once when we had a reground set of cams installed in an f4i. The cams are oil filled and they...

pics?

i know there is an old post about small sprockets for an f4i, i posted on it. use the search function.

pictures? what happened?

its a spring loaded weight. pull a valve cover. its a very simple mechanism thats hard to explain but easy to see what it does.

if you can get the engine to idle right a 2000rpm you will here a...

cool. yeah, it did take forever! oh well had to get the cob webs out sometime.

Wes or Zach. Any progress on this?

these starters make some strange sounds sometimes.
when you say "the starter seems to spin for a while on its own and then suddenly engage", have you verified this from the ecu rpm trace?

we ran an unsealed chain on our cars until 04. after that we ran X ring chains from RK. the unsealed require a lot of maintenance and fling chain lube all over everything.