If I remember correctly most of the Engine Accessories are cross compatible, but the chassis is different. Bill would know about the chassis and suspension differences as I believe he designed the...
Type: Posts; User: BeaverGuy
If I remember correctly most of the Engine Accessories are cross compatible, but the chassis is different. Bill would know about the chassis and suspension differences as I believe he designed the...
With a good design the decrease in density is only at the throat of the restrictor, meaning you are still intaking air at Atmospheric pressure into the cylinders. You calculated ~75g/s as the choked...
Wow, people are still referring to what I did a 8 or 9 years ago.
From what I recall, that is the basic method that my sizing script used. The initial guess at U was programmed in because there...
Yes they are a real company. They are a vendor that I use quite frequently. PM me for more info.
The lower end quadro cards aren't that expensive. A quadro 600 with 1gb of ram is $170 on NewEgg. And just becasue they are on the lower end doesn't really mean much because software requirements...
If you are planning to run Solidworks with assemblies of any decent size you need to to get a profesional graphics card, this goes for FEA as well. Performance with the gaming cards is not very good...
The displacement limit, restrictor, and throttle/turbo position wrt the restrictor are safety featurse. The restrictor with the throttle before and turbo after the restrictor limits airflow to ~72g/s...
Oregon State ran the '00-'02 ZX-6R(same as the '05-'08 ZZR600) from 2000 until 2008. I know that Missouri also ran the engine for a few years as I remember talking to them about it at the '04...
Your first two problems really are the same.
As was mentioned Workbench does not allow contacts to be generated between vertices. As a result your model us undercontstrained and flying every...
Sorry that didn't work, I don't have access to the Structural Design Workbench only the catalogs and sections. When I browsed into the AISC catalog and inserted a new part from the catalog the...
Because of your difficulties playing with the structural sections I was inspired to play with it at work. And I figured out how to add a new family of profiles to the catalog. First I will explain...
Shaun,
Regarding the perfect moddeling vs. getting it close, I am of the opinion that what ever you are modelling you should model it to completion and include every detail that you can. The...
$50,000 is a high budget team. Structural composites certainly aren't neccesary. From the picturse I saw, RIT was a steel frame car. Also, from the limited information that I have, the steel frame...
These types of posts are always interesting. Even within my team when I was still in Uni, we had this discusion. Where we fell at the time was that composite monocoques were outside of our means and...
I think you might be talking about University of Washington's car. From their twitter page it says that they had a transmission failure but have since swapped engines and are ready for tomorrow.
For those of you that keep saying "Oregon" there is no Oregon car, only Oregon State. Oregon is the green and yellow school located further to the south and without an engineering program. We aren't...
Any coating that requires electroplating and some of those that don't have the potential for hydrogen embrittlement. This includes chrome, nickel, black oxide, manganese phosphate, and zinc and...
The big question is what do you need version conrol for and how are you going to use it?
When I was in university and on most of the projects where I work, you work in a local directory that only...
You don't want to look on Bosch Motorsports. I don't remember where specifically but abotu 2 1/2 years ago I found a PDF catalog of Bosch's mass air flow sensors that listed part numbers and...