http://www.bike-parts-honda.co...0700-CBR+600+RR.html
It's the part number 9 but I'll be cheaper to buy a used part.
http://www.ebay.com/sch/i.html...&_osacat=0&_from=R40
Type: Posts; User: Hub
http://www.bike-parts-honda.co...0700-CBR+600+RR.html
It's the part number 9 but I'll be cheaper to buy a used part.
http://www.ebay.com/sch/i.html...&_osacat=0&_from=R40
The hornet 2007 trigger wheel is part of the starter clutch, so it'll not be easy to make one.
The cbr trigger wheel is the same except the number of tooth (12 equally spaced). It'll be easier for...
Yes Bemo,
As you said we tried to stick to it, but it's not easy and like you it cause problems when we made exception.
Below the last part with all the problems we had during the project. I write...
Chapter II: Below I explain only the adaptation of the previous organization to our team.
- Project presentation to students and university. January 2009
I discover Formula Student in December...
Hello,
Our team, the DMS Racing team from Versailles (France) was created in 2009 and participated for the first time with a car in 2010. As a news team, I think it could be a good idea to write...
Pictures of our 2010 car.
http://www.dmsrt.com/images/st...eam_carter_final.jpg
http://www.dmsrt.com/images/st..._anti_dejaugeage.jpg
http://www.dmsrt.com/images/st...rter_en_position.jpg
The quaife diff is a ready made solution and is affordable. They could give you a discount if you ask. http://www.quaife.co.uk/shop/products/qdf7zr
And perhaps a cheaper one....
Below is a link to our 2008 Hornet engine scan. 2007 and 2008 engine are identical. Unfortunately the scan is very, very incomplete.
http://dl.free.fr/csrP1hU1L
If someone want the Point Cloud to...
Your rear roll hoop support is not ok with the rules.
h t t p : / /www.fsaeonline.com/Downloads/2010_FSAE_Rules_Clarifications_and_Examples.pdf
They are a lot of infos on motorbike disc manufacturer. Below a few examples.
http://galfer.es/asp/catalogo_...amilia=1&p_cataleg=M
http://www.ngbrakedisc.com/downloads/referencias.pdf...
We use the stock battery for our engine (Hornet 2008) and it's a YTZ7S. During the first tests and event our engine never work fine at idle so after a lot of re-start our battery run low but it's...
We are using skynam ECU because we have a good support and it's easy to find in France.
We don't have a lot of functions, but it's enough for us. The ecu is cheap and come with a lot of extra parts....
It's our first car so we didn't have experience with other diff.
The Drexler is probably the best diff but cost a lot. The torsen is cheaper but you need to make your housing.
We are a small team...
Autocross lap:
w w w.youtube.com/watch?v=L0NYK6FSjWU
"Complete" endurance http://fsae.com/groupee_common/emoticons/icon_frown.gif
w w w.youtube.com/watch?v=uqJPgSLnNd8
A compilation with...
We use the same diff with the stub axle configuration from taylor race and I think they also made stub shaft with tulip tripod for this diff.
Not a lot of time to take pictures this year, but below a few from the end of endurance.
I'll post later inboard video from autocross and endurance.
...
The GFR tripod didn't fit our axle, but hopefully HS Karlsruhe got one and it works fine.
Thank you Chris and GFR for the help. Also thank you Jan and HS Karlsruhe for giving us a tripod, you permit...
Yes Chris, it's the same tripod. Our housing is ok, only slightly marked. Thanks for your help, I'm more relax now.
Kirby our problem came after 200 Km. Thanks for the info and we will see what we...
Our left shaft is shorter so the angle is bigger. I'll post a pic.
I don't know when it's occur but strangely the 3 caps came off and only in one side of the shaft. When checking the car we see a...
I've posted a pic and a link to the tripod but the post need to be moderated.
It's the Taylor Race fsae tripod, part number 02002011.
The pic:
h t t p : //h.ds.free.fr/fs/tripod.jpg
The part number we need is: 02002011
h t t p : //www.taylor-race.com/pdf/ACF4CC.pdf
Hello,
Today when doing our last testing before the Italian comp we broke one of our Taylor Race Tripod.
All our roller bearings came off, like you can see in the pic. If your team have spare...
And a selection of the most graphical photos.
http://h.ds.free.fr/gallery/galleries/Motors_cars/2009/FS_Italy/TH_Karlsruhe/IMG_1516.jpg
...
A link to my gallery with my FS Italy 2009 pics.
http://h.ds.free.fr/gallery/index.php?/category/41
I've organise them by team and one folder for general images....
I don't have pictures from Eindhoven car.
I've finish the edit my images and I'm selecting them to my gallery. Will be available in a few days.
Yes, I'm late... ...