-
New video of onboard footage of us training drivers - as well as testing shift cut.
http://vimeo.com/26119256
We'll be testing quite a bit in the coming weeks - so we'll be posing new videos on our twitter stream over the next few days (@UTS_Motorsports)
--
Pete Ringwood
UTS Motorsports
UTS, Sydney, Australia
-
Some say: Electric cars are not exciting http://www.youtube.com/watch?v=OWCvAWNqzPs
are they?
-
This is not a "Best FSAE movie", but since people seem to be posting their own uni's videos up to this thread, I'll add some pretty current video footage from Melbourne Uni: MUR FSAE2011: Francois' chassis
There are lots more videos in my channel, though most are boring GoPro vids of drivers doing laps around Silhouette Karts.
I'll try to get more footage on a very regular basis, so that people have lots of new vids to look at - I know I spend a lot of time on YouTube looking for new FSAE videos http://fsae.com/groupee_common/emoticons/icon_smile.gif
Sorry for the background music.
-
Props to KBB for putting this FSAE Cali 2011 video together: http://www.youtube.com/watch?v...iDcc&feature=related
Pretty proud of my drift, calibration, and muffler design at 0:51. Haha.
-
obviously not the best video of our team http://fsae.com/groupee_common/emoticons/icon_wink.gif, but still not a bad one:
http://www.youtube.com/watch?v=NVFGZWmWzWk
our current car at ZF Racecamp
-
More videos of what's going on at Melbourne Uni/MUR Motorsports: Melbourne Uni FSAE 2011: Waiting for Kevin S (and drinking coffee)
Now that I've got my own HD video camera, I'll be taking a lot of short videos and uploading the footage to YouTube.
We are in the process of building our 2011 car, so expect lots of progress.
-
Just some more footage from today, doing the finishing welds on the exhuast: Framcois welding the exhaust port adapters (sliding camera)
And in the dyno, reattaching the servo motor arm after the new power supply applied too much torque and yanked the arm off the spline shaft: Kah Shen fixing the servo motor arm.
-
-
-
Exciting news from Melbourne Uni: the 2011 is almost finished (deadline was this Saturday), but due to a broken hub that needs to be remade, this has been pushed back a week or so.
Anyway, the engine was run in the 2011 car for the first time on Wednesday. No major dramas (fuel line leak was found & fixed when test priming the fuel system; a cooling hose leaked when the water temps rose, was determined to be incorrect placement of a hose clamp, and suitably fixed). Here are the vids:
Melbourne Uni FSAE 2011: First Engine Run
Melbourne Uni FSAE 2011: Second Run after fixing cooling leak
Melbourne Uni FSAE 2011: Hashan Revving the engine