Forum: Open FSAE Discussion

Thanks a bunch!

I am designing the brake system for our fsae car.There is a bit confusion.As per the design,for the initial 60% of pedal travel only regenerative...

hey v r from india and v are particip8n in fomula student japan. to design and select the drive axel wat are the required considerations.please help...

Hello all, I read the rules on the wiring of the brake over travel switch and it says that it has to be wired in series with the rest of the...

Hey everyone. I'm from Bradley University and our team is running the Genesis 80fi this year. We are trying to get a hold of an AutoCAD model of the...

Hey guys, I'm currently a Master's student here at ASU, and I'm exploring doing a Master's thesis/project for the FSAE car here (probably engine)....

is air restrictor design independent of the displacement of the engine? As in, whether bike is of 250cc or 600cc, will the restrictor be same in both...

Hi, we are planning to implement a pneumatic paddle shifter mechanism with a single plate instead of separate paddles. Further, we are to use a...

Hi guys, I'm trying to justify a target steering torque (at the wheel) for our car. I have found some initial torque values for typical FSAE cars...

Hey There, The FSAE 2013 rules says : "All spherical rod ends and spherical bearings on the steering or suspension must be in double shear or...

Hi, everyone. I have some questions about selecting fuel pumps. What is the shut off pressure of fuel pump? And can a pump produces higher pressure...

Any preferred vendors out there? I know Mcmaster-Carr is a last resort but they seem to have the best price on what we need. The machine shop doesn't...

Hi. We are planning to implement a hand-clutch paddle placed behind the steering wheel, on the driver's left side. For gear shifting, the inital idea...

Okay, after 4 years of FSAE, I give up trying to understand FSAE radiator ducting. Convention is to have a diverging inlet (slow the air down),...

Hi Guys, I'm Agedee and pretty new to this forum. My current project is the history and usage of carbon in the FSAE. After some googling I...

Hi there, I a trying to minimize the weight and size of the fuel pump and tank assembly. We are using an in-tank fuel pump and it is enclosed...

we want to manufacture our plenum using Rapid Prototyping. we have SLS and polyamide material for manufacturing. can anyone give me suggestions on...

Please I need help for answer to the quiz

i need sensetta crash sensors datasheets apart from the one available (the two page doc) if any one has something more please share the link to...

In the rules for the new U.S. FSAE Electric competition it is specified that we have to use a torque encoder to measure the angle of the accelerator...